Where provided, keys and controls shall contrast visually from background surfaces....
Search Results "Check Writing Surface"
-
407.2 Contrast
-
Williams Sound PPA 458 NET PRO PERSONAL PA® PRO FM ASSISTIVE LISTENING SYSTEM
Check with your government radio regulations for 72-76 MHz operation. NOTE: Approved by the FCC for operation in U.S. markets. The system cannot be used in all countries....
-
STORY
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
Openings [1018.6]
Openings are gaps in the surface of a beach access route....
-
SEAT HEIGHT MEASUREMENT DETAIL
Note that examination tables and chairs only use bolsters on certain areas of the transfer surface....
-
1.3.2 Focus Following NPRM Comments
This review identified four major issue areas for the MDE Advisory Committee to address, as follows: Transfer surface height and size Permitted obstructions to the transfer surface...
-
Primary Function
transportation facilities that involve primary functions include, but are not necessarily limited to, ticket purchase and collection areas, passenger waiting areas, train or bus platforms, baggage checking...
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised 0.2 inch (5.1 mm) from the surface...
-
Visual Alarms, Notification Devices and Telephones [9.3] Auxiliary Alarms
Where portable devices are used, it is important that the appliance be checked to make sure it is functioning properly, and that correct and appropriate connections and placement are made...
-
§ 382.37 Seat assignments
the opportunity to move with the animal to a seat location, if present on the aircraft, where the animal can be accommodated, as an alternative to requiring that the animal travel with checked...
-
BACKGROUND
At that time, the City’s Employment Application required public applicants to answer the following inquiry: “Check if any of the following are applicable: __Disabled Veteran ___ Disabled...
-
5.4.1.2 Transfer and Positioning Support Location for Imaging Equipment
Transfer supports should be provided for imaging equipment with transfer surfaces with depths of less than or equal to 24 inches....
-
Literature Cited
Standard test method for shock-absorbing properties of playing surface systems and materials. ASTM F355-95, Vol. 15.07....
-
11B-406.5.6 Grade breaks
Grade breaks shall not be permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks shall be flush....
-
106.5.64 Story
That portion of a building or facility designed for human occupancy included between the upper surface of a floor and upper surface of the floor or roof next above....
-
Edge Protection
Edge Protection Where railings, guards, or handrails are provided, edge protection must be provided and extend a minimum of 2 inches above the ground or deck surface....
-
22. How can I get copies of the ASTM standards that apply to play areas?
American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, Pennsylvania 19428, www.astm.org: ASTM F 1292-99 Standard Specification for Impact Attenuation of Surface...
-
§ 382.41 Stowage of personal equipment
(f) When a folding, collapsible, or break-down wheelchair cannot be stowed in the passenger cabin as carry-on baggage, carriers shall provide for the checking and timely return of passengers...
-
¼ Inch Minus Limestone
The surface was installed in two rolled and compacted 3 inch lifts....
-
Identification: ADA Standard Section 502.6
Section 502.6 covers the current ADA Standards for parking space identification signs.
-
Handrail Extensions: ADA Standard Section 505.10
Section 505.10 covers the current ADA Standards for handrail extensions.
-
11B-403.5.3 Passing spaces
Passing spaces shall be either: a space 60 inches (1524 mm) minimum by 60 inches (1524 mm) minimum; or, an intersection of two walking surfaces providing a T-shaped space complying with...
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
Based on the restructure of the transfer surface provisions, described above in Section IV.B.1.b....
-
5. Significance and Use
5.1 This practice provides a means for obtaining a quantitative estimate of a surface property defined as roughness using longitudinal profile measuring equipment. 5.1.1 The PRI is portable...