If the tent platform floor is raised above grade, the floor height must be no more than 19 inches when measured from the clear ground space to the tent platform surface....
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish. Holds two standard toilet tissue rolls. Secured with pin tumbler lock, keyed like all AJW...
that would be reflected from a perfectly diffusely reflecting surface....
Where picnic tables are provided, at least one picnic table, and one additional table for each 20 tables or fraction thereof, shall be accessible and comply with Section 11B-902 _|Dining Surfaces...
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised 0.2 inch (5.1 mm) from the surface...
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height....
Specifications address size, spacing, position, surfaces, fittings, and structural strength....
Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with knee and toe space complying with Section 1133A.7....
A personal support network is made up of individuals who will check with you and assist when needed. This network consists of people who are regularly in the same area as you. ...
desires to modify any portion of this Agreement because of changed conditions making performance impossible or impractical or for any other reason, it will promptly notify the Department in writing...
(e) HWI’s policy shall be that in assigning guestrooms upon check-in, each Brand Hotel shall hold available at least two non-premium accessible rooms for guests requesting accessible rooms...
On blended transitions, detectable warning surfaces shall be placed at the back of curb....
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
Judges' benches, clerks' stations, bailiffs' stations, deputy clerks' stations, court reporters' stations and litigants' and counsel stations shall comply with Section 11B-902 _|Dining Surfaces...
These requirements apply to gratings located in any walking surface, including courtyards and plazas, not just those on accessible routes....
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised 0.2 inch (5.1 mm) from the surface...
warning surface and the luminance contrast of the warning surface with adjacent surfaces....
Visitor use may have impact on the surface conditions. It is impossible to control the number of children using any given public playground. ...
The slope of the turning space and clear floor or ground space surface shall not be steeper than 1:48 (2 percent) in all directions....
Section 403.5 specifies a continuous clearance of 36 inches minimum for walking surfaces....
Detectable warning surfaces complying with R305 shall be provided at the following locations on pedestrian access routes and at transit stops: 1....