Exceptions: 1. Playing surfaces shall not be required to comply with Section 11B-302.2 _|Carpet|_. 2....
Search Results "Enhanced 9-1-1"
-
11B-1007.2 Accessible routes
-
1118B.3
SECTION 1124B - GROUND AND FLOOR SURFACES 1124B.1 General. ...
-
UpScale by Medical Accessibility - Adjustable Height Exam Table with Built-in Scale
Enhances Privacy - Allows for patient weight and measurement to be taken in the exam room, rather than the hallway....
-
Guest Rooms
to 25 1 0 1 26 to 50 2 0 2 51 to 75 3...
-
Assisted Living Directory - Connecticut Assisted Living Facilities & Senior Care
If you need help, or are having trouble finding care, we recommend learning about Connecticut 2-1-1, which is supported by the State of Connecticut, and the United Way of Connecticut....
-
11B-107 Special conditions appeals action
See Chapter 1, Section 1.9.1.5....
-
11B-107 Special conditions appeals action.
See Chapter 1, Section 1.9.1.5....
-
Permitted Protrusions in Wheelchair Spaces: ADA Standard Section 1002.4.4.3
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
-
11B-605.5.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side...
-
11B-605.5.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
-
E205.1 General (Section-by-Section Analysis)
In turn, proposed E205 requires conformance to the Level A and Level AA Success Criteria and Conformance Requirements specified for Web pages in WCAG 2.0 or ISO 14289-1 (PDF/UA-1), both...
-
Sloped Surfaces
., 1:20, means one unit of vertical rise for each 20 units of horizontal length); or a percentage (e.g., 8.33% which equates to a ratio of 1:12 or 4.76 degrees)....
-
3.3.2. Audio Description Hardware Scoping Requirements
Average Number of Auditoriums* Audio Description Hardware Units Required Per Venue Type Megaplex (16+ auditoriums) 18 1...
-
M301.2.4 Unobstructed Transfer
EXCEPTIONS: 1....
-
4.8.2* Slope and Rise
The maximum slope of a ramp in new construction shall be 1:12. The maximum rise for any run shall be 30 in (760 mm) (see Fig. 16)....
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-805.4 Examination, diagnostic and treatment rooms
of Statewide Health Planning and Development (OSHPD), which has jurisdiction over hospitals and long-term care facilities in California, issued Code Application Notice CAN 2-11B, dated 9/...
-
11B-805.4 Examination, diagnostic and treatment rooms
of Statewide Health Planning and Development (OSHPD), which has jurisdiction over hospitals and long-term care facilities in California, issued Code Application Notice CAN 2-11B, dated 9/...
-
Ground Level and Elevated Play Components: ADA Standard Section 1008.2.1
EXCEPTIONS: 1....
-
Landings: ADA Standard Section 406.4
Section 406.4 covers the current ADA Standards for curb ramp landings.
-
General: ADA Standard Section 216.1
Section 216.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for signs.
