Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
Search Results "Enhanced 9-1-1"
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
-
11B-410.8 Restriction sign
For lifts with a signed installation contract before May 1, 2008: CCR, Title 8, Section 3094 provides safety regulations for Vertical Platform (Wheelchair) Lifts....
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
Swinging Doors and Gates: ADA Standard Section 404.2.4.1
Section 404.2.4.1 covers the current ADA Standards for maneuvering clearances at swinging doors and gates.
-
11B-608.3 Grab bars
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
1010.2.13.1 Delayed egress locking system
Sign lettering shall be at least 1 inch (25 mm) in height and shall have a stroke of not less than 1/8 inch (3.2 mm). 6.4....
-
11B-608.3 Grab bars
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
APPENDIX A
[ ] <300 feet (1 block, 90 meters) [ ] 300 to 3000 feet (1-10 blocks, 90-1000 meters) [ ] 3000 to 5000 feet (10-17 blocks, 1000-1600 meters) [ ] 5000 to 10,000 feet (1-2 miles,...
-
11B-206.2.8 Employee work areas
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
Alterations: ADA Standard Section 202.3
Section 202.3 covers the most current requirements for alterations in existing building and facilities.
-
11B-603.2.3 Door swing
[2010 ADA Standards] 1....
-
11B-206.2.8 Employee work areas
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
11B-603.2.3 Door swing
[2010 ADA Standards] 1....
-
Cross Slope
Comments indicated that specifications for cross slope (1:48 maximum) are not referenced in the curb ramp section. Response....
-
12204(c)(2) Sites eligible for listing in national register
.), the guidelines described in paragraph (1) shall, at a minimum, maintain the procedures and requirements established in 4.1.7 (1) and (2) of the Uniform Federal Accessibility Standards...
-
How are charges of discrimination filed?
If there is no EEOC office nearby, call, toll free 1-800-669-4000 (voice) or 1-800-800-3302 (TDD)....
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Cross Slope [1016.7.2]
When the surface is constructed of concrete, asphalt, or boards, the cross slope must be no steeper than 1:48 (2 percent)....
-
12204(c)(2) Sites eligible for listing in National Register
.), the guidelines described in paragraph (1) shall, at a minimum, maintain the procedures and requirements established in 4.1.7(1) and (2) of the Uniform Federal Accessibility Standards...
-
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis)
This side reach requirement mirrors existing 508 Standards § 1194.25(j)(1) and Figure 1....
-
1008.1.9.7, Item 5
THIS DOOR WILL OPEN IN 15 [30] SECONDS ALARM WILL SOUND” Sign lettering shall be at least 1 inch (25 mm) in height and shall have a stroke of not less than 1/8 inch (3.2 mm)....
-
68.20. Buildings and Facilities Subject to Compliance with the Texas Accessibility Standards
Buildings and Facilities Subject to Compliance with the Texas Accessibility Standards (New rule section effective November 5, 2001, 26 TexReg 8807; amended effective February 1, 2005, 30...
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....