Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
Search Results "Maximum Dimension"
-
11B-504.2 Treads and risers
-
11B-239.2 Minimum number
If a course is designed with the minimum 50 percent accessible holes, designers or operators are encouraged to select holes which provide for an equivalent experience to the maximum extent...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
4. Passenger Information
For instance, this final rule requires carriers through their reservation agents to inform passengers of the maximum weight and dimensions of a device that can be accommodated in the aircraft...
-
Omnia Industries Inc. Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass No.2036SF
Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass Dimensions: Rose: 7/16" projection x 2-9/16" square Turnpiece: 1-1/2" x 1/4", 1-1/8" projection, 1-7/16" square...
-
Delta Vero™ Single Handle Centerset Lavatory Faucet with Riser Less Pop-Up 753LF
Drain assembly sold separately Meets standards set by Americans with Disabilities Act (ADA) 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa Single hole installation Rigid spout Assembled dimensions...
-
Fifi Large Interior Wall Sconce by Hampstead
Dimensions: L:23.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 55W 2G11: #46042 Gold: 1 x 55W 2G11: #46044...
-
Dodo 12 Interior Wall Sconce by Hampstead
Dimensions: D:8" H:12" E:3" Diffuser: Blown Glass Number of Diffuser: 1 Finish: Satin Nickel Color: Topaz Certification: ADA and cUL Options: Satin Nickel: 60W Torpedo...
-
Fifi Small Interior Wall Sconce by Hampstead
Dimensions: L:15.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 24W 2G11: #46038 Gold: 1 x 24W 2G11: #46040...
-
American Specialties 9012 Surface Mounted Baby Changing Station
Using mounting dimension on cut sheet diagram will result in knee clearance under the unloaded bed tray, after installation, of 27" to 27-3/8" [686 to 695] and the rim of the changing table...
-
Cavity Sliders USA Inc. CL100 ADA Privacy Lever Lock for Pocket Doors
IMPORTANT: Operable parts of hardware must be mounted 34 inches (865mm) minimum and 48 inches (1220 mm) maximum above the finished floor to meet ADA guidelines....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
11B-809.2.2 Turning space
Exception: Turning space shall not be required in exterior spaces 30 inches (762 mm) maximum in depth or width. Advisory 11B-809.2.2 Turning space....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
11B-809.2.2 Turning space
Exception: Turning space shall not be required in exterior spaces 30 inches (762 mm) maximum in depth or width. Advisory 11B-809.2.2 Turning space....
-
Ground Level Play Components: ADA Standard Section 240.2.1
Section 240.2.1 covers scoping requirements in the current ADA Standards for ground level play components.
-
11B-240.2.1 Ground level play components
Where ramps connect elevated play components, the maximum rise of any ramp run is limited to 12 inches (305 mm)....
-
11B-240.2.1 Ground level play components
Where ramps connect elevated play components, the maximum rise of any ramp run is limited to 12 inches (305 mm)....
-
§ 36.403(a)(1)
(1) An alteration that affects or could affect the usability of or access to an area of a facility that contains a primary function shall be made so as to ensure that, to the maximum extent...
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
Cross Slope
Cross Slope The cross slopes of gangways, transition plates and floating piers that are part of an accessible route must be designed and constructed not to exceed a maximum of 2 percent...
-
Dispersion
To provide anglers with disabilities similar opportunities, the accessible 34-inch maximum railing must be located in a variety of places on the pier or platform to offer a variety of locations...
-
403.5.1 Clear Width
EXCEPTION: The clear width shall be permitted to be reduced to 32 inches (815 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by...
-
407.4.8.2.1 Signal Type
EXCEPTION: For elevators other than destination-oriented elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum...
