The knee and toe space must be at least as deep as the reach depth measured from the leading edge of the obstruction....
Search Results "Unit of Measurement"
-
Knee and Toe Space
-
Carpenter's levels
To determine angles the level must be used with a measuring tape to determine slope....
-
11B-604.9.3 Height
The height of water closets shall be 11 inches (279 mm) minimum and 17 inches (432 mm) maximum measured to the top of the seat....
-
11B-703.5.8 Character spacing
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
- Access-Able Designs Tub Transfer Bench SH-414-2SDL
-
SCOTT JOHNSON v. STARBUCKS CORPORATION - AMICUS BRIEF
ANDERSON (CABN 149604) United States Attorney SARA WINSLOW (DCBN 457643) Chief, Civil Division ELLEN LONDON (NYRN 4605671) Assistant United States Attorney 450 Golden Gate Avenue...
-
TEST NO. 2 – SITE ANALYSIS TEST
In no case shall less than 20 percent of the ground floor dwelling units be on an accessible route and comply with the provisions of Division IV. 3....
-
TEST NO. 2 – SITE ANALYSIS TEST
In no case shall less than 20 percent of the ground floor dwelling units be on an accessible route and comply with the provisions of Division IV....
-
4.1.2(5)(d)(ii)
(ii) Units and facilities that specialize in treatment or services for persons with mobility impairments: 20 percent of the total number of parking spaces provided serving each such unit...
-
607 Bathtubs
Specifications for bathtubs in section 607 address clear floor space, seats, grab bars, operable parts, shower spray units, and enclosures....
-
Monetary Relief for Complainant
Blockbuster will deliver the check to counsel for the United States by common carrier United Parcel Service, delivery prepaid, to the following address: William Lynch, Trial Attorney, Disability...
-
1002.4.4.1 Width and Length
Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface...
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
1002.4.4.1 Width and Length
Wheelchair spaces shall provide a clear width of 30 inches (760 mm) minimum and a clear length of 48 inches (1220 mm) minimum measured to 9 inches (230 mm) minimum above the floor surface...
-
1(2)(b)(i)
(i) the unusual site characteristics result in a difference in finished grade elevation exceeding 30 inches and 10 percent measured between an entrance and all vehicular or pedestrian arrival...
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
-
Are bollards, poles, columns, or other elements permitted within the marked area of access aisles?
(The width of spaces and aisles is measured to the centerline of markings but can include the full line width where there is no adjacent parking space or aisle)....
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
-
§ 38.81(b)
(b) Other stepwells, and doorways with lifts, ramps or bridge plates, shall have, at all times, at least 2 foot-candles of illumination measured on the step tread or lift or ramp, when deployed...
-
11B-1002.4.4.1 Width and length
Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor surface...
-
MONETARY RELIEF FOR THE COMPLAINANT
States and will simultaneously send a copy of the check and the accompanying letter to the United States. ...