Fire alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 (1999 or 2002 edition) (incorporated by reference, see “Referenced Standards” in Chapter...
Search Results "Hybrid Surface System"
-
702.1 General
-
Accessible Routes [§402]
Accessible Routes [§402] Components of accessible routes include walking surfaces, doorways, ramps, curb ramps, elevators, and, where permitted, platform lifts....
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section dimension of...
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to the roadway, the...
-
1007.6.3 Two-way communication
Areas of refuge shall be provided with a two-way communication system between the area of refuge and a central control point....
- GE Artistry™ Series 30" Free-Standing Electric Range ABS45DFWS
- Viking E-1600-03B-EWP Emergency Phones with Built-in Auto Dialer and Digital Announcer with Weather Protection
- Varidesk LLC. Pro Desk 60™ Height-Adjustable Standing Desk
-
11B-402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the flared...
-
M305.2.6 Gripping Surface
Transfer support gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
May a transit operator require that wheelchairs be secured in buses and vans?
Yes, if the transit operator has established such a policy, and the vehicle is required to be equipped with a securement system by 49 CFR Part 38....
-
Openings [1017.6]
Openings are gaps in the surface of a trail....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
Accessible Routes: ADA Standard Section 1002.2
In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with 403 and required on ramps complying with 405 shall not be required to comply with...
-
1009.11 Instructions
Directions for use of the two-way communications system where provided. ETA Editor's Note CBC 1009.11 does not include “Directions to find other means of egress”....
-
11B-1002.2 Accessible routes
. ◼ In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with Section 11B-403 and required on ramps complying with Section 11B...
-
What kinds of securement equipment must be provided in buses and vans?
Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and shoulder harness...
-
11B-402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the flared...
-
11B-402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the flared...
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
1003.3.1 Boat Slip Clearance
However, where mooring systems for floating piers are replaced as part of pier alteration projects, an opportunity may exist for increasing accessibility....
- PlayLSI: A Higher Level of Inclusive Play
- Diversified Woodcrafts Forward Vision ADA Workstation 2956KF-L-ADA
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6¼ inches (160 mm) maximum, and a cross-section dimension of...



