. ◼ In load or unload areas and on amusement rides, handrails provided along walking surfaces complying with Section 11B-403 and required on ramps complying with Section 11B...
Search Results "Hybrid Surface System"
-
11B-1002.2 Accessible routes
- Diversified Woodcrafts Forward Vision ADA Workstation 2946KF-L-ADA
-
Triax 2000
A large tripod that can be raised to a fall height above the highest play surface on a playground. ...
- Bobrick Charting Station/Shelf B-7816
-
11B-706.3 Receiver hearing-aid compatibility
Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops. Advisory 11B-706.3 Receiver hearing-aid...
-
706.3 Receiver Hearing-Aid Compatibility
Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops. Advisory 706.3 Receiver Hearing-Aid...
- Balco FMS-A and FMS-V Roll-Up Floor Mat
-
When is resurfacing considered to be an alteration?
triggers the requirement to add curb ramps if it involves work on a street or roadway spanning from one intersection to another, and includes overlays of additional material to the road surface...
-
M305.3.2 Height
The height of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....
-
Stairways [§504]
Stairways [§504] Requirements for stairways address treads and risers, surfaces, nosings, and handrails....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
240.1 General
In existing play areas, where play components are relocated for the purposes of creating safe use zones and the ground surface is not altered or extended for more than one use zone, the...
- Allen Tel Emergency Phone Automatic Ring Down Circuit - Single Number Dial
- Allen Tel ADA Outdoor Phone with Amplified Receiver and No Dial
-
11B-810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable. Perpendicular to the roadway, the...
-
Elevator Car Requirements [§407.4.2 – §407.4.5]
Elevator Car Requirements [§407.4.2 – §407.4.5] Other requirements for elevator cars include: compliant floor surfaces a maximum 1¼” horizontal clearance between car...
- Feeling Safe, Being Safe Webcast Training: Being Prepared
- Feeling Safe, Being Safe Webcast Training: The Emergency Kit
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
4.6.5 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
- Door King Inc. VoIP Integration for Entry and Access Control Systems






