Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
Search Results "Expected Maximum Flight Duration"
-
803.5 Coat Hooks and Shelves
-
R410.9 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers. ...
-
4.26.3(4)
(4) Tensile force induced in a fastener by a direct tension force of 250 lbf (1112N) plus the maximum moment from the application of 250 lbf (1112N) shall be less than the allowable withdrawal...
-
4.7.9.3 Height
Water spouts must be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground or floor....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
M305.3.1 Horizontal Position
Where the support is horizontal, the top of the gripping surface shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
-
M305.3.2 Vertical Position
Where the support is vertical, it shall be 18 inches (455 mm) minimum in length and the bottom end of the support shall be 34 inches (865 mm) high minimum and 37 inches (940 mm) high maximum...
-
Do drinking fountains pose hazards as protruding objects?
This is not required for wheelchair accessible units with no more than a 27” clearance below (the minimum required for knee clearance and the maximum recognized for cane detection)....
-
1134A.6, Item 2
The maximum slope of the shower floor shall be ½ inch (12.7 mm) per foot in any direction and shall slope to a drain....
-
11B-809.8.4 Door signal devices
The activating mechanism shall be mounted 48 inches (1219 mm) maximum above the floor and connected to permanent wiring....
-
11B-809.10.6.2 Slope
The slope of the shower floor shall be 1/2 inch (12.7 mm) per foot maximum in any direction and shall slope to a drain....
-
Yale 8800 Series Grade 1 Mortise Locks
For over 160 years, Yale Locks and Hardware has built a reputation on manufacturing products that exceed expectations of quality and reliability....
-
Williams Sound PPA 458 NET PRO PERSONAL PA® PRO FM ASSISTIVE LISTENING SYSTEM
Features three powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound....
-
Williams Sound PPA 458 PRO PERSONAL PA® PRO FM ASSISTIVE LISTENING SYSTEM
Features three powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound....
-
Williams Sound PPA 457 PRO PERSONAL PA® PRO FM ASSISTIVE LISTENING SYSTEM
Features three powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound....
-
Brinks Home Security Alwood Keyed Entry Lever
Despite being so easy to use, these locks are built to achieve the most rigorous residential security standards as you would expect from Brinks....
-
Check-Out Aisles [7.3]
Clear passage must be at least 36 inches wide continuously and 32 inches at a point (24 inch maximum distance). Access can be provided at aisles shared between two check-outs....
-
Automated Revolving Doors
developed safety criteria, the industry safety code for automated doors referenced by ADAAG does not currently address revolving doors, and certain questions remain, such as the appropriate maximum...
-
ATTACHMENT A
The determination of which appropriate auxiliary aids and services are necessary, and the timing, duration and frequency with which they will be provided, will be made by H&R Block,...
-
11B-604.5.2 Rear wall
Since there is no change to the wording of Subsection 11B-604.5.2, there is no reason to expect that OSHPD will change its interpretation. ...
-
11B-604.5.2 Rear wall
Since there is no change to the wording of Subsection 11B-604.5.2, there is no reason to expect that OSHPD will change its interpretation. ...
-
Dimensions and Capitalization: ADA Standard Section 703.3.1
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
