For those individuals able to complete the pinching tasks, the results showed that both the ability to perform a grip and the magnitude of maximum grip force are substantially affected by...
Search Results "Expected Maximum Flight Duration"
-
3.3.14 Grip Strength
- ABLE Center for Independent Living - Odessa, TX
-
F. The Department's Rulemaking History Regarding Captioning and Video Description
The Department wishes to learn more about the status of digital conversion, concrete projections regarding if and when movie theater owners and operators, both large and small, expect to...
-
E202.5.2 Required Documentation (Section-by-Section Analysis)
Second, the Board expects that invocation of the undue burden and fundamental alteration exceptions will be infrequent, which would also mean an infrequent need for written determinations...
-
3. The Legislative History of the ADA
Importantly, the House Committee stated that “technological advances can be expected to further enhance options for making meaningful and effective opportunities available to individuals...
-
Standards Development
We expect to work with this Committee over the next three years to develop a process for addressing the implications of our findings (see Section 4.0) for accessibility standards used in...
- Sargent 8200 Lever Lock
- TownSteel TDG129 Door Guard
- Pressalit Care PLUS Support Arm Fixed Height Swing Grab Bar
-
2. Benefits: Qualitative Summary of Benefits
The most significant benefits from the 2016 Non-Rail Vehicle Guidelines are expected to flow from the automated stop and route announcement systems requirement....
-
704.2.1.2 Forward Approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
703.5.8 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The transfer support should be located a maximum distance of 1½ inches from the transfer surface....
-
R403.4 Operation
The force required to activate operable parts shall be 22 N (5 lbs) maximum....
-
T304.3 Location
Operable parts provided at a wheelchair space shall be located adjacent to the wheelchair space 24 inches (610 mm) minimum and 36 inches (915 mm) maximum from the rear of the wheelchair...
-
T702.6 Character Spacing
Spacing between individual characters shall be 10 percent minimum and 35 percent maximum of character height....
-
407.6 Operation
The force required to activate operable parts shall be 5 pounds (22.2 N) maximum....
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
407.9 Operation
The force required to activate operable parts shall be 5 pounds (22.2 N) maximum....
-
8.4 Card Catalogs and Magazine Displays
Maximum reach height shall comply with 4.2, with a height of 48 in (1220 mm) preferred irrespective of approach allowed....
-
Incidental Rooms and Spaces
These can include work areas such as equipment control rooms, projection booths, radio and news booths, press boxes, and other occupiable spaces of incidental use where the maximum occupancy...
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...