Maintaining trail tread and access routes, such as filling ruts, reshaping a trail bed, replacing or reshaping surfacing material, repairing washouts, installing riprap to retain cut and fill slopes...
Search Results "Sloped Entry"
Filters
Commonly Searched Documents
-
Maintenance
-
The Purpose of FSORAG and FSTAG
(scoping); what has to comply with the guidelines; definitions of terms; and technical requirements defining the physical characteristics of accessible features, such as width, height, slope...
-
Evaluating the Physical Accessibility of Polling Places
The checklist is designed to prompt the user to check key features by asking questions about sizes, sloped surfaces, and availability of accessible features, and in some areas it suggests...
-
4.9.4 HANDRAILS
At the bottom, the handrail shall continue to slope for a distance of the width of one tread from the bottom riser; the remainder of the extension shall be horizontal (see Fig. 19(c) and...
-
Standardized Tests of Physical Fitness and Community Ambulation
Perceived difficulty was designed to consider factors such as the security of footing, obstacle negotiation, and effort required on slopes....
-
2. Shared Use Paths
, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width, grade, cross slope...
-
2. Shared Use Paths
, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width, grade, cross slope...
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
Test No. 1 -- Individual Building Test may only be used if the site has terrain over 15 percent slope. Test No. 3 -- Unusual Characteristics Test may be used if applicable....
-
3. Camera
Consider taking additional photos of the digital level showing slope and cross slope measurements of walkways and ramps as well as photos showing exactly where the digital level was placed...
-
Clear Ground Space [1011.2]
The technical requirements include specific provisions for the size, location, surface, slope, and openings in the clear ground space....
-
Develop a Transition Plan
Where a public entity has responsibility or authority over streets, roads, or walkways, its transition plan must include a schedule for providing curb ramps or other sloped areas where pedestrian...
-
A) Accessible Parking
Access aisle of at least 60-inch width must be level (1:50 maximum slope in all directions), be the same length as the adjacent parking space(s) it serves and must connect to an accessible...
-
4. Overhead PV Systems
The project, including incidental work to implement a) and b) above, is not an alteration that would trigger path of travel upgrades;11 When located on sloping ground (running slope...
-
Bonded Impact/cushioning Surfaces
A1 and E1 were on a slope to assure drainage of the entire test surface. All surfaces used Engineered Wood Fiber (EWF), as defined by ASTM F2075-01....
-
Maintenance
One site utilizing PIP as the primary access route and EWF as the secondary access route was assessed with less than 1 percent slope at the transition between the two surface materials. ...
-
Providing Comforts and Conveniences—Constructed Features
For example, even if steep terrain or other conditions in an alteration project at a recreation site preclude complying with the slope requirements for the outdoor recreation access route...
-
II. Rulemaking History
The 2007 draft also proposed to decrease the maximum running slope of vehicle ramps to 1:8 (as compared to the existing guidelines, which specify a range of ramp slopes from 1:4 to 1:12,...
-
11B-608.5.3 Alternate roll-in type shower compartments
Where a seat is not provided, the controls, faucets, and shower spray unit shall be installed on the side wall farthest from the compartment entry....
-
Turnstiles and Security Gates at Entrances
If an inaccessible turnstile is located at the entrance to the business and no accessible gate or entry is provided, it must be replaced or removed or an alternative accessible entrance...
-
Plan 4A: 13-Foot Wide Accessible Guest Room
• 30-inch wide by 48-inch long minimum clear floor space provided beyond the arc of the swing of the entry door (section 603.2.3 exception 2). ...
-
Number of Accessible Entrances
Many persons with disabilities urged the Board to increase this scoping so that they have equal access in terms of convenience, entry options, travel distances, and proximity to accessible...
-
M305.3.1 Length (Section-by-Section Analysis)
First, for diagnostic equipment containing wheelchair spaces with one entry that also serves as the exit, the length of the gripping surface for horizontal standing supports must be equal...
-
36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
The MDE Standards will allow independent entry to, use of, and exit from the equipment by individuals with disabilities to the maximum extent possible....
-
IV. CONCLUSION
CONCLUSION Because the Agreements proposed by the Parties are procedurally defective, the United States Objects to their approval and urges the Court to deny entry of these Agreements...