provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support...
Search Results "Vertical Standing Support"
Commonly Searched Documents
-
11B-604.8.1.4 Toe clearance
-
11B-604.8.1.4 Toe clearance
provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support...
-
2. Comparison of Proposed Rule with EN 301 549 Standard
Documentation and Services Chapter 12 – Documentation and support services Unique chapters No comparable chapter 13 – Relay and Emergency Services...
-
Speech Output: ADA Standard Section 707.5
Where speech synthesis cannot be supported, dynamic alphabetic output shall not be required to be audible. Advisory 707.5 Speech Output....
-
Medical Diagnostic Equipment: ADA Standard Section 5.
Review the updated information on the revisions to the ADA Standards regarding medical diagnostic equipment.
-
3. Medical Diagnostic Equipment
They include requirements for equipment that necessitates transfer from mobility aids and address transfer surfaces, support rails, armrests, and other features....
-
11B-707.5 Speech output
Where speech synthesis cannot be supported, dynamic alphabetic output shall not be required to be audible. Advisory 11B-707.5 Speech output....
-
Conference Proceedings and Final Passage
Mitchell’s motion came to an immediate vote, but only 40 senators supported it....
- Landscape Forms Inc. Multiplicity Bench Collection
-
C102 Referenced Standards (Section-by-Section Analysis)
require manufacturers to conform to WCAG 2.0 when providing electronic content integral to the use of their equipment (under proposed C203.1), a user interface (under proposed C205.2), or support...
-
702 Fire Alarm Systems
Commenters supported limiting the sound level to 110 decibels, as proposed....
-
Minimum Clear Opening
The majority of commenters representing the disability community supported the Option One specification of a minimum clear opening of 32 inches....
-
II. Rulemaking History
The MDE Advisory Committee made recommendations regarding transfer surface height, transfer surface size, transfer sides, transfer supports, armrests, stirrups, lift compatibility, wheelchair...
- Gamco Surface-Mounted Robe Hook Satin - 76717
- Kawneer North America 350/500 Heavy Wall™ Entrances
- Kessel Design Linearis Super60 Trench Drain
- The Protection & Advocacy (P&A) System
-
11B-1009.2 Pool lifts
Additional options such as armrests, head rests, seat belts, and leg support will enhance accessibility and better accommodate people with a wide range of disabilities....
-
229 Windows
Commenters generally supported this provision but some commenters asked whether the maximum five-pounds (5 lbs.) of force requirement of section 309 applies to the window latch itself or...
-
1009.2.9 Lifting Capacity
Single person pool lifts must be capable of supporting a minimum weight of 300 pounds (136 kg) and sustaining a static load of at least one and a half times the rated load....
-
3306.2 Walkways
Walkways shall be accessible in accordance with Chapter 11A or 11B as applicable, and shall be designed to support all imposed loads and in no case shall the design live load be less than...
-
220 and 707 Automatic Teller Machines and Fare Machines
be speech enabled and exceptions are provided that cover when audible tones are permitted, when advertisements or similar information are provided, and where speech synthesis cannot be supported...
-
Handrails
The 20- to 24-inch width for the accessible pool stairs is intended to provide support for individuals with disabilities who are ambulatory....
-
1009.2.9 Lifting Capacity
Single person pool lifts must be capable of supporting a minimum weight of 300 pounds (136 kg) and sustaining a static load of at least one and a half times the rated load....
