The height of the lower grab bar on the back wall of a bathtub shall comply with 607.4.1.1 or 607.4.2.1....
Search Results "Door Height"
Filters
Commonly Searched Documents
-
609.4 Position of Grab Bars
-
Cavity Sliders USA Inc. CS SofStop™ Insert Track
The CS SofStop™ pocket insert track is a smooth running, soft closing system designed specifically for pocket doors. ...
-
§ 38.123(a)(3)
mounted behind the water closet, and a horizontal grab bar at least 40 inches long shall be mounted on at least one side wall, with one end not more than 12 inches from the back wall, at a height...
-
BEA Inc. EMR475 Series Door Access 4.75" Round Panther Plate (Push to Open)
PANTHER PLATES are an easy to mount, wireless, 4.75 inch round push plates with an RF 433 code-encrypted security transmitter. Panther plates are weather-resistant, NEMA 4 rated...
-
BEA Inc. PBS45 Series Door Access 4.5" Square Push Plate (Push to Open)
The PBR 4.5 series is a smaller solution to the standard 6 inch PR series push plates. This 4½ inch design features the same functionality as the 6" plate but is simply available in...
-
BEA Inc. EMS475 Series Door Access 4.75" Square Panther Plate (Push to Open)
PANTHER PLATES are an easy to mount, wireless, 4.75 inch square push plates with an RF 433 code-encrypted security transmitter. Panther plates are weather-resistant, NEMA 4 rated...
-
BEA Inc. PBR45 Series Door Access 4.5" Round Push Plate (Push to Open)
The PR 4.5 series is BEA's smallest, most discreet push plate line, smaller than the 4.75 and 6 inch push plates. Only differing in size, the 4½ inch design features the same...
-
Construction Specialties, Inc. Barrier-resistant Doors
Barrier-resistant Doors Barrier resistant doors feature a small, compact door contained within the main door to prevent patients from barricading themselves in a room....
-
Hager Companies Door Protection Plate 220S
Door Protection Plate 220S 0.062" gauge with no bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates - Spanner...
-
Hager Companies Door Protection Plate 214S
Door Protection Plate 214S 0.125" gauge with 4-sided bevel Materials: - Plastic Laminate NFPA Notes: - Self-adhesive tape available on all plates - Spanner head screws...
-
11B-216.2 Designations
Exception: Exterior signs that are not located at the door to the space they serve shall not be required to comply with Section 11B-703.2. ...
-
Hager Companies Door Protection Plate 223S
Door Protection Plate 223S 0.062" gauge with 3-sided bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates - Spanner...
-
Hager Companies Door Protection Plate 224S
Door Protection Plate 224S 0.062" gauge with 4-sided bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates - Spanner...
-
11B-707.7.2 Characters
Characters displayed on the screen shall be in a sans serif font. Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter "I". Characters shall contrast...
-
Corbin Russwin Inc. DC62900 Series Electromechanical Closer-Holder
Corbin Russwin Electric Track Closer-Holders combine the functions of a single-point electromechanical door holder with the DC6200 door closer....
-
11B-402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the...
-
402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the...
-
402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the...
-
T502.2.2 Other Vehicles
For other non-rail vehicles, the vertical clearance at doorways shall be 56 inches (1420 mm) minimum on small non-rail vehicles and 68 inches (1725 mm) on large non-rail vehicles.
-
402.2 Components
402.2 Components. Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps...
-
10.3.1(7)*
(7)* Automatic fare vending, collection and adjustment (e.g., add-fare) systems shall comply with 4.34.2, 4.34.3, 4.34.4, and 4.34.5. At each accessible entrance such devices shall...
-
Accessible Routes [§402]
Accessible Routes [§402] Components of accessible routes include walking surfaces, doorways, ramps, curb ramps, elevators, and, where permitted, platform lifts.
-
11B-402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the...
-
11B-402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the...
