Sturdy heavy-duty steel components firmly fasten the door to the frame - at top, bottom and center latch points - strengthening the opening during a windstorm event....
Search Results "Door Height"
- Sargent FM7100 Multi-Point Auto Deadlocking Door System
- Horton Automatics ICU/CCU Bi-Fold/Bi-Swing™ Door System
- Hager Companies Rectangular Wrought Door Pull 2
- Horton HD-Storm™ 70/80/85 PSF Belt Drive
- Cavity Sliders USA Inc. FH Ceiling Mount Track
- Horton ProSlide® Series 2003 Belt Drive System
-
Kawneer North America 2000T Terrace Doors
Requires the Premium User plan or above. (Login or upgrade your account!)
- Norton 5600 Series Low Energy Operator
- Activar Hiawatha 535/509/536/537 Solid 1 inch Diameter Pulls
-
T502.2 Doorways with Lifts, Ramps or Bridgeplates
Vertical clearance shall be measured from the inside finished edge of the door opening to the highest point of the deployed lift, ramp or bridgeplate below....
-
602.6 Water Flow
The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit. The angle of the water stream shall...
-
602.7 Drinking Fountains for Standing Persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1090 mm) maximum above the finish floor or ground.
-
11B-602.7 Drinking fountains for standing persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above the finish floor or ground.
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of the water stream shall...
-
10.3.1(6)
(6) Lists of stations, routes, or destinations served by the station and located on boarding areas, platforms, or mezzanines shall comply with 4.30.1, 4.30.2, 4.30.3, and 4.30.5. A...
-
4.21.3 Seat
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36. The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the...
-
4.35.4 Bench
Every accessible dressing room shall have a 24 in by 48 in (610 mm by 1220 mm) bench fixed to the wall along the longer dimension. The bench shall be mounted 17 in to 19 in (430 mm...
-
4.21.3 SEAT
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36. The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the...
-
11B-602.7 Drinking fountains for standing persons
11B-602.7 Drinking fountains for standing persons. Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above...
-
Treads and Riser Specifications in the ADA Standards (§504)
Treads and Riser Specifications in the ADA Standards (§504) Nosing Specifications
-
§ 38.23(b)(13) Handrails
(13) Handrails. Platforms on lifts shall be equipped with handrails on two sides, which move in tandem with the lift, and which shall be graspable and provide support to standees...
-
§ 38.159(b)(13) Handrails
(13) Handrails. Platforms on lifts shall be equipped with handrails on two sides, which move in tandem with the lift, and which shall be graspable and provide support to standees...
-
11B-602.6 Water flow
11B-602.6 Water flow. The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of...
-
§ 38.125(b)(13) Handrails
(13) Handrails. Platforms on lifts shall be equipped with handrails, on two sides, which move in tandem with the lift, and which shall be graspable and provide support to standees...