The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of the water stream shall...
Search Results "Door Height"
-
11B-602.6 Water flow
-
10.3.1(6)
(6) Lists of stations, routes, or destinations served by the station and located on boarding areas, platforms, or mezzanines shall comply with 4.30.1, 4.30.2, 4.30.3, and 4.30.5. A...
-
4.21.3 Seat
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36. The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the...
-
4.35.4 Bench
Every accessible dressing room shall have a 24 in by 48 in (610 mm by 1220 mm) bench fixed to the wall along the longer dimension. The bench shall be mounted 17 in to 19 in (430 mm...
-
4.21.3 SEAT
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36. The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the...
-
11B-602.7 Drinking fountains for standing persons
11B-602.7 Drinking fountains for standing persons. Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above...
-
Treads and Riser Specifications in the ADA Standards (§504)
Treads and Riser Specifications in the ADA Standards (§504) Nosing Specifications
-
§ 38.23(b)(13) Handrails
(13) Handrails. Platforms on lifts shall be equipped with handrails on two sides, which move in tandem with the lift, and which shall be graspable and provide support to standees...
-
§ 38.159(b)(13) Handrails
(13) Handrails. Platforms on lifts shall be equipped with handrails on two sides, which move in tandem with the lift, and which shall be graspable and provide support to standees...
-
11B-602.6 Water flow
11B-602.6 Water flow. The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of...
-
§ 38.125(b)(13) Handrails
(13) Handrails. Platforms on lifts shall be equipped with handrails, on two sides, which move in tandem with the lift, and which shall be graspable and provide support to standees...
-
§ 38.83(c)(8) Handrails
(8) Handrails. If provided, handrails shall allow persons with disabilities to grasp them from outside the vehicle while starting to board, and to continue to use them throughout the...
-
11B-602.7 Drinking fountains for standing persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above the finish floor or ground.
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of the water stream shall...
-
BEA Inc. PBR45 Series Door Access 4.5" Round Push Plate (Push to Open)
The PR 4.5 series is BEA's smallest, most discreet push plate line, smaller than the 4.75 and 6 inch push plates. Only differing in size, the 4½ inch design features the same...
-
BEA Inc. EMR475 Series Door Access 4.75" Round Panther Plate (Push to Open)
PANTHER PLATES are an easy to mount, wireless, 4.75 inch round push plates with an RF 433 code-encrypted security transmitter. Panther plates are weather-resistant, NEMA 4 rated...
-
BEA Inc. PBS45 Series Door Access 4.5" Square Push Plate (Push to Open)
The PBR 4.5 series is a smaller solution to the standard 6 inch PR series push plates. This 4½ inch design features the same functionality as the 6" plate but is simply available in...
-
BEA Inc. EMS475 Series Door Access 4.75" Square Panther Plate (Push to Open)
PANTHER PLATES are an easy to mount, wireless, 4.75 inch square push plates with an RF 433 code-encrypted security transmitter. Panther plates are weather-resistant, NEMA 4 rated...
-
T502.2 Doorways with Lifts, Ramps or Bridgeplates
Vertical clearance shall be measured from the inside finished edge of the door opening to the highest point of the deployed lift, ramp or bridgeplate below....
-
Cavity Sliders USA Inc. CS SofStop™ Insert Track
The CS SofStop™ pocket insert track is a smooth running, soft closing system designed specifically for pocket doors. ...
-
Corbin Russwin Inc. DC62900 Series Electromechanical Closer-Holder
Corbin Russwin Electric Track Closer-Holders combine the functions of a single-point electromechanical door holder with the DC6200 door closer....
-
Hager Companies Door Protection Plate 220S
Door Protection Plate 220S 0.062" gauge with no bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates - Spanner...
-
Hager Companies Door Protection Plate 214S
Door Protection Plate 214S 0.125" gauge with 4-sided bevel Materials: - Plastic Laminate NFPA Notes: - Self-adhesive tape available on all plates - Spanner head screws...
-
11B-216.2 Designations
Exception: Exterior signs that are not located at the door to the space they serve shall not be required to comply with Section 11B-703.2. ...
