Section 35.138(c) of the proposed rule requires a facility to identify available accessible seating if seating maps, brochures, or other information is provided to the general...
Search Results "Floor Identification"
Filters
Commonly Searched Documents
-
Identification of available accessible seating. (Section-by-Section Analysis)
-
11B-216.9 TTYs
Identification and directional signs for public TTYs shall be provided in accordance with Section 11B-216.9....
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2)....
-
Attachment A: Violations Identified in the United States' Letter of Findings (Sept. 29, 2014)
[See subsections ...]
-
Re: 11B-904.3.4 Identification sign
From the ETA Staff: Thank you for the comment to let us know. We will correct the misspelling. In future, we invite you to submit a Helpdesk ticket, by using the "Feedback or...
-
Re: 11B-904.3.4 Identification sign
when displayed, this section refers to "heck out aisles" instead of check out aisles
-
Disability Access - Tips for the small business
California Commission on Disability Access http://www.ccda.ca.gov
-
7(2)(a)
(a) Bathrooms that have reinforced walls for grab bars (see Requirement 6) would meet section 100.205(c)(3)(iv) if: Note: Cabinets under lavatories are acceptable provided the...
-
4.34.6 KITCHENS
Accessible or adaptable kitchens and their components shall be on an accessible route and shall comply with the requirements of 4.34.6.
-
11B-812.8.1 Four or fewer
Where four or fewer total EVCS are provided, identification with an International Symbol of Accessibility (ISA) shall not be required....
-
Face® Dipstick® Floor Profiler (Measuring F-Numbers - Concrete Flatness & Levelness Measurement)
The Dipstick is used in 63 countries on six continents to measure concrete floor flatness and levelness....
-
407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with tactile symbols as shown in Table 407.4.7.1.3....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
The symbol shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline of the symbol....
-
Building Requirement: ADA Standard Section 217.4.3
Section 217.4.3 covers scoping requirements in the current ADA Standards for TTYs on the floor of public and private buildings.
-
POINT-OF-SALE DEVICE
[DSA-AC] A device used for the purchase of a good or service where a personal identification number (PIN), zip code or signature is required....
-
11B-407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3...
-
407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with tactile symbols as shown in Table 407.4.7.1.3....
-
11B-407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3...
-
11B-407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3...
-
11B-216.11 Check-out aisles
aisles are identified by numbers, letters, or functions, signs identifying check-out aisles complying with Section 11B-904.3 shall be located in the same location as the check-out aisle identification...
-
11B-806.2.3.1 Personal lift device floor space
There shall be a clear space under the bed for the use of a personal lift device. The clear space shall extend under the bed parallel to the long side and be adjacent to an...
-
Inpro Corporation ENDURANT® Floor-to-Ceiling Mounted Partitions
Features & Benefits Ideal for healthcare, education and corporate environments Utilizing a reinforced wood core, BioPrism® Privacy Partitions are comprised...
-
Takeform Fusion Signage Floor Directional Type B.2
Directional headers have raised copy. A slide-in printed insert enables the sign to be easily updated. Locations Corridor intersections Elevator...
