Advisory 502.4 Floor or Ground Surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
Search Results "Floor Identification"
Filters
Commonly Searched Documents
-
502.4 Floor or Ground Surfaces
-
502.4 Floor or Ground Surfaces
Advisory 502.4 Floor or Ground Surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves....
-
405.9.1 Extended Floor or Ground Surface
The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505....
-
703.4.1 Height above Finish Floor or Ground
703.4.1 Height above Finish Floor or Ground....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
Inpro Corporation ENDURANT® Floor-Mounted Overhead-Braced Partitions
Our floor-mounted overhead-braced privacy partitions are manufactured from BioPrism® Solid Surface featuring an industry leading bio-resin blend....
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
Priority 1: Approach & Entrance
Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
-
Access Board: Signs
-
809.5.6 Site, Building, or Floor Entrance
809.5.6 Site, Building, or Floor Entrance....
-
Area of Refuge Identification [IBC §1007.6.5 (2003), §1003.2.13.5.5 (2000)]
In addition, areas of refuge are not required in open parking garages, apartment buildings, detention and correctional facilities, or open exit stairways between floors in buildings with...
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
703.5.6 Height from Finish Floor or Ground
703.5.6 Height from Finish Floor or Ground. Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....
-
Regulatory Impact Analysis.
An initial regulatory impact analysis of the costs and benefits of a proposed rule is required by Executive Order 12866 (as amended by Executive Order 13258 and Executive Order...
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
11B-703.8.9 Height above floor
Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
Tormax Technologies iMotion® TN 110 In-Floor Swing Door Operator (High and Low Energy)
iMotion® TN 110 In-Floor Swing Door Operator (High and Low Energy) The iMotion® TN 110 In-Floor swing Door Operator (High and Low Energy) is the best choice for door automation in demanding...
