Search Results "Gripping Surface"

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  R409.7.1 Circular Cross Section

  Handrail gripping surfaces with a circular cross section shall have an outside diameter of 32 mm (1.25 in) minimum and 51 mm (2 in) maximum....

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.3 Standing Supports (Section-by-Section Analysis)

  The Access Board sought public input in questions 39 and 40 in the MDE NPRM preamble on whether the cross section dimensions for gripping surfaces should be applied to standing supports...

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  1009.5.7 Grab Bars

  Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above each step and transfer platform....

• Additional Access Publications > 5 “G’s” Getting Access to Health Care for People with Physical Disabilities
  3.2 Getting on the Table

  Additional helpful features include an extra-wide top surface and higher weight capacity for larger people, adjustable side rails, positioning straps, and foot and leg supports that can...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2 Transfer Supports

  Transfer supports shall comply with M305.2.

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.2 Transfer Supports (Section-by-Section Analysis)

  This is an introductory section. As discussed above in Section IV.E.1. (Significant Changes – Transfer Supports), the Access Board strengthened the transfer support requirements and...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4 Transfer Supports

  5.4 Transfer Supports.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4 Transfer Supports Recommendations

  5.4 Transfer Supports Recommendations

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M305.2 Transfer Supports

  Transfer supports shall comply with M305.2.

• Federal Documents > Technical Assistance > ADA/Section 504 Design Guide - Accessible Cells in Correction Facilities
  Note

  As shown, there are several ways for grab bars to be designed with adequate gripping surfaces, while ensuring that nothing can be tied onto them....

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  Grab Bar Height

  The Board has clarified that the height of grab bars is measured to the top of the gripping surface (609.4)....

• Webinars, Videos, and Training > Spirit of the ADA
  Boost Your Business - Chapter 4 - Ramps
  

  Boost Your Business - Chapter 4 - Ramps

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  Detectable Warning Surfaces on Curb Ramps (Section-by-Section Analysis)

  Detectable Warning Surfaces on Curb Ramps (Section-by-Section Analysis) When the Access Board issued the 1991 ADAAG, the guidelines contained a requirement for detectable warning surfaces...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  1009.5.7 Grab Bars

  Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above each step and transfer platform....

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-1009.5.7 Grab bars

  Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above each step and transfer platform....

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-1009.5.7 Grab bars

  Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above each step and transfer platform....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.3.1 Permitted Obstructions to Transfer Sides for Equipment Used by Patients in a Supine, Prone, Side-Lying or Seated Position

  5.3.1 Permitted Obstructions to Transfer Sides for Equipment Used by Patients in a Supine, Prone, Side-Lying or Seated Position. A 3-inch maximum obstruction is permitted at transfer...

• Federal Documents > Standards > 2010 ADA Standards
  Dispensers: ADA Standard Section 604.7

  Section 604.7 covers the current ADA Standards for toilet paper dispensers.

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-809.9.7 Exposed pipes and surfaces

  Exposed water supply and drain pipes under sinks and lavatories shall comply with Section 11B-606.5.

• Research and History > Research Documents > Visual Detection of Detectable Warning Materials by Pedestrians with Visual Impairments - Final Report
  Appendix C: Previous Research on the Visibility of Detectable Warning Surfaces

  1.1 m (42 in.) x 1.1 m (42 in.) detectable warning surfaces....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4.3.1 Positioning Support Height Recommendation for Imaging Equipment with Transfer Surfaces

  5.4.3.1 Positioning Support Height Recommendation for Imaging Equipment with Transfer Surfaces For imaging equipment with transfer surfaces, the Committee recommends a positioning support...

• Research and History > Research Documents > National Trail Surfaces Study
  26. Please indicate who installed the trail surface

  Please indicate who installed the trail surface (choose all that apply): Manufacturer Contractor Agency/Organization/Park staff Volunteer Unknown...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  R409.7.2 Non-Circular Cross Sections

  Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 100 mm (4 in) minimum and 160 mm (6.25 in) maximum, and a cross-section dimension of 57 mm...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-1009.5.7 Grab bars

  Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above each step and transfer platform....