Bent ends of tubing pass through the flanges and are welded into a single structural unit for maximum strength....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
Filters
Commonly Searched Documents
-
Bradley Security Grab Bars SA70 Series
-
Security Glazing
A commenter pointed out that the provision for solid partitions or security glazing in visiting areas should be revised to be more consistent with the technical provision it references,...
-
§382.55(b)(3)
(3) You must not require private security screenings of passengers with a disability to a greater extent, or for any different reason, than for other passengers....
-
The Blind Photographer
Requires the Registered User plan or above. Login! -
2. Follow the Accessibility Standards for Play Areas
provided where the restricted accessible route exceeds 30 feet in length; or 2) the clear width of accessible routes shall be permitted to be 36 inches minimum for a distance of 60 inches maximum...
-
Camping and Picnic Facilities [F244.2.3.1, F244.3, F245.2.5.1, and F244.5.3]
Within camping and picnic units with mobility features (figure 16), at least one of each type of outdoor constructed feature must comply with the applicable technical requirements for the...
-
Significant alternatives
Questions are included in the preamble requesting comments on the economic and technical impacts of the technical criteria in the proposed standards, and whether alternative technical criteria...
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Height: ADA Standard Section 604.9.3
Section 604.9.3 covers the current ADA Standards for the height of children's use water closets.
-
11B-604.9.3 Height
The height of water closets shall be 11 inches (279 mm) minimum and 17 inches (432 mm) maximum measured to the top of the seat....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-813.2.6 Shelf
No fewer than one shelf shall be provided in close proximity to the changing table at 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
6. Compliance Monitoring
We also asked whether there were any specific technical barriers to maintaining Web site accessibility after full Web site compliance is initially achieved....
-
Mobile or Portable Amusement Rides
areas serving a ride should provide a level wheelchair turning space to provide equal opportunity for individuals with disabilities to be able to participate on the amusement ride to the extent...
-
1008 Play Areas
The play area specifications address accessible routes, ground level and elevated play components, play structures, and ground surfaces....
-
Facility
Facility - All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicle ways located on a site...
-
Facility
All or any portion of buildings, structures, improvements, elements, and pedestrian or vehicular routes located in the public right-of-way....
-
Facility
All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicular ways located on a site....
-
§ 35.151(c)(4)
(4) For the purposes of this section, ceremonial groundbreaking or razing of structures prior to site preparation do not commence physical construction or alterations....
-
Boat Slip Clearance: ADA Standard Section 1003.3.1
Each 10 feet (3050 mm) maximum of linear pier edge serving boat slips shall contain at least one continuous clear opening 60 inches (1525 mm) wide minimum. EXCEPTIONS: 1....
-
11B-1003.3.1 Boat slip clearance
Each 10 feet (3048 mm) maximum of linear pier edge serving boat slips shall contain at least one continuous clear opening 60 inches (1524 mm) wide minimum....
-
M303.3.3 Ramped (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry of a wheelchair space, level changes greater than ½ inch high would be required to be ramped and comply with technical...
-
3. Primary Consideration: Who Chooses the Auxiliary Aid or Service?
On-site interpreter services may still be required in those situations where the use of video interpreting services is otherwise not feasible or does not result in effective communication...
-
11B-809.10.7.3 Reinforcement for grab bars
Where reinforcement is installed at the back, it shall be installed between 30 inches (762 mm) maximum and 38 inches (965 mm) minimum above the finish floor....