Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
Search Results "Qualification Standard"
-
404.3 Automatic and Power-Assisted Doors and Gates
-
§ 36.406(g) Medical care facilities
Medical care facilities that are subject to this section shall comply with the provisions of the 2010 Standards applicable to medical care facilities, including, but not limited to, sections...
-
Toilet Rooms-Banquet Area
See Standards § 4.13.11(2)(b). t. The toilet centerline of the men's toilet room is 19" from the side wall instead of the required 18". See Standards § 4.16.2....
-
Toilet Rooms North (Celebrity Spies)–Men [sic]
See Standards § 4.13.11(2)(b). ee. The men's toilet room stall door hardware requires tight grasping and twisting of the wrist. See Standards § 4.13.9....
-
414.1.1 Digital Television Tuners
Digital television tuners shall provide audio description processing that conforms to ATSC A/53 Digital Television Standard, Part 5 (2014) (incorporated by reference, see 702.2.1)....
-
Requirement 2. Accessible and usable public and common use areas.
Guideline The following chart identifies the public and common use areas that should be made accessible, cites the appropriate section of the ANSI Standard, and describes the appropriate...
-
212 Kitchens, Kitchenettes, and Sinks
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 212.2 Kitchens...
-
Original research for ANSI A117.1 (1957 - 1961)
Original research for ANSI A117.1 (1957 - 1961) In the original research for ANSI A117.1 - 1961, American National Standard Specifications for Making Buildings and Facilities Accessible...
-
§ 35.151(h) Medical care facilities.
Medical care facilities that are subject to this section shall comply with the provisions of the 2010 Standards applicable to medical care facilities, including, but not limited to, sections...
-
II-6.1000 General
This means that the facility must be designed, constructed, or altered in strict compliance with a design standard....
-
11B-407.2.1 Call controls
[2010 ADA Standards] 407.2.1 Call Controls. Where elevator call buttons or keypads are provided, they shall comply with 407.2.1 and 309.4. Call buttons shall be raised or flush....
-
11B-405.9.1 Reserved.
[2010 ADA Standards] 405.9.1 Extended Floor or Ground Surface....
-
New and Altered Permanently Installed Amusement Rides
Section 234 of the 2010 Standards sets out scoping requirements and section 1002 sets out the technical requirements for the accessibility of permanently installed amusement rides....
-
Legal Authority and Purpose
Legal Authority and Purpose We are required by the Americans with Disabilities Act (ADA) and the Rehabilitation Act to issue guidelines for the accessibility standards adopted by the...
-
Completing the Checklist
The checklist is based on requirements from the ADA Standards for Accessible Design (Standards)....
-
Furnishings and Equipment
The DOJ and DOT ADA Standards, like most building requirements and codes, apply to those elements that are fixed or built-in....
-
H. Repairing and Rebuilding
They may choose from two design standards for new construction and alterations – either the Uniform Federal Accessibility Standards (UFAS) or the ADA Standards for Accessible Design (ADA...
-
224.5 Dispersion
ETA Editor’s Note: This Access Board note was taken from 36.406(c)Standards for New Construction and Alterations; Places of Lodging. ...
-
410.2 Volume Gain (Section-by-Section Analysis)
The proposed section would replace existing 508 Standards § 1194.23(f) and existing 255 Guidelines § 1193.43(e)....
-
II. Rulemaking History
Notice of Proposed Rulemaking – Medical Diagnostic Equipment Accessibility Standards, 77 FR 6916 (February 9, 2012) (hereinafter MDE NPRM)....
-
Sec. 469.003(a)
(a) The standards adopted under this chapter apply to:...
-
COMPLY WITH
Meet one or more specifications of this standard....
-
2.6 Communications.
In addition, under the 2010 ADA Standards for Accessible Design, there are signage requirements that address the need for directional and informational signs that communicate information...
-
304 Turning Space
304 Turning Space Section 4.2.3 of the 1991 Standards and Section 304.3 of the 2010 Standards allow turning space to be either a circular space or a T-shaped space....