It is generally acceptable to use required clearances to provide wheelchair turning space....
Search Results "Clearance Around Base"
-
11B-809.2.2 Turning space
-
603.2.3 Door Swing
Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space. EXCEPTIONS: 1....
-
603.2.3 Door Swing
Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space. EXCEPTIONS: 1....
-
608.2.1 Transfer Type Shower Compartments
Clearance of 36 inches (915 mm) wide minimum by 48 inches (1220 mm) long minimum measured from the control wall shall be provided....
-
SafePath VulcanLanding™ Rubber Transition Ramp
Modifying vertical rises at door thresholds often requires more than just a ramp, it requires a level-landing, otherwise known as maneuverable clearance area, a firm and stable level surface...
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
ACCESS AISLE
[DSA-AC] An accessible pedestrian space adjacent to or between parking spaces that provides clearances in compliance with this code....
-
Hager Companies Door Protection Plate 190S
US32 and US32D with screw fasteners (must specify UL stamp) - Self-adhesive tape available on all plates - Spanner head screws - Torx head screws - Round corners - Wrap around...
-
R305.1.1 Dome Size
The truncated domes shall have a base diameter of 23 mm (0.9 in) minimum and 36 mm (1.4 in) maximum, a top diameter of 50 percent of the base diameter minimum and 65 percent of the base...
-
2.5.1 U.S. Food and Drug Administration
FDA classifies medical devices based on the level of risk of harm they present to patients and users. There are three classes, ordered from low to high risk: Class I, II, and III....
-
Volume Control Telephones: ADA Standard Section 704.3
Amplifiers on pay phones are located in the base or the handset or are built into the telephone. Most are operated by pressing a button or key....
-
Key Title II obligations for state and local government entities
These examples reflect many of the experiences of state and local leaders around the country who have implemented these strategies to comply with the ADA....
-
Position and Hand physiology
An additional issue relative to position was that the frame around the map interfered with reading the Braille....
-
1013.1 General
The technical requirements address the clear ground space around tent pads and tent platforms (1013.2); the slope of tent pads, tent platforms, and clear ground spaces (1013.2); and the...
-
1630.16(f)(2)
(2) A covered entity may establish, sponsor, observe or administer the terms of a bona fide benefit plan that are based on underwriting risks, classifying risks, or administering such risks...
-
§1630.16(f)(2)
(2) A covered entity may establish, sponsor, observe or administer the terms of a bona fide benefit plan that are based on underwriting risks, classifying risks, or administering such risks...
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying with 306 shall be provided....
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying with 306 shall be provided....
-
Accessible Surfaces Located In The Use Zone
located within the use zone, accessible ground surfaces must also be impact attenuating and meet ASTM F 1292-04 Standard Specification for Impact Attenuation of Surface Systems Under and Around...
-
Squatty Potty
Squatty Potty wraps perfectly around your existing toilet and easily stores out of the way when not in use. We designed, created, tried and tested and then did it again and again....
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
Technical Memorandum TM 2013-14 Dining Surfaces
In addition, dining surfaces must be dispersed based on TAS 226.2; therefore, each type of dining surface must comply with TAS 902....
