Construction Specification Institute While developing suggested tolerances for surface materials, the Construction Specifications Institute developed a suggested method for measuring ramp slopes...
Search Results "Sloped Sidewalk"
-
Construction Specification Institute
-
3. Review the Research Findings About Accessibility Issues for Play Surfaces
Deficiencies (excessive running slope, cross slope, change in level, or openings) for PIP, TIL and HYB began to emerge 24-36 months after installation....
-
Appendix B: Overview of Federal Regulations and Guidance for Detectable Warnings
Detectable warnings have a raised grid of small flat-top domes (truncated domes) which is the standard texture element required for use on curb ramps or at other flush transitions between sidewalks...
-
5.8.2.7 Base Support Allowance Recommendation
The Committee also discussed adding an allowance for a sloped region at the base of the gantry....
-
6. Recognize that Proper Installation of Play Surface Systems is Key
Site plans and construction drawings should provide details like maximum running slopes and cross slopes, beveled edges, transitions, adjoining seams and affixing the surface material to...
-
Allegion Falcon 2390 Series Recessed Exit Device
End Caps: Sloped metal end caps ANSI: Certified ANSI A156.3 Grade 1 standards Vertical Rods: 7' standard, extension rods available up to 10'....
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
facility by other recreational users, as well as their safety; on the administrative components of government agencies required to assess which devices are appropriate on narrow, steeply sloped...
-
11B-604.3.2 Overlap
2-11B, dated 9/9/14, which includes the following interpretation of Subsection 11B-604.3.2: Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope...
-
11B-604.3.2 Overlap
2-11B, dated 9/9/14, which includes the following interpretation of Subsection 11B-604.3.2: Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope...
-
1007.1 Accessible means of egress required
In assembly areas with sloped or stepped aisles, one accessible means of egress is permitted where the common path of travel is accessible and meets the requirements in Section 1028.8, and...
-
Shower Threshold
The proposed rule specified a maximum threshold height of ½ inch, provided that those greater than ¼ inch are beveled with a slope of 1:2 maximum (608.7)....
-
Fishing piers and platforms. (Section-by-Section Analysis)
attached to land) are involved, a number of exceptions are provided from the general standards for accessible routes in order to take into account the difficulty of meeting accessibility slope...
-
Fishing piers and platforms. (Section-by-Section Analysis)
attached to land) are involved, a number of exceptions are provided from the general standards for accessible routes in order to take into account the difficulty of meeting accessibility slope...
-
Location
The slope along the accessible route should not be greater than 1:12 in the direction of travel....
-
Technical Infeasibility
plumbing, life safety or other codes (such as when combining two toilet stalls to create an accessible stall would violate the plumbing code’s required fixture count); meeting slope...
-
Location
The slope along the accessible route should not be greater than 1:12 in the direction of travel....
-
11B-505.6 Gripping surface
Exceptions: Where handrails are provided along walking surfaces with slopes not steeper than 1:20, the bottoms of handrail gripping surfaces shall be permitted to be obstructed along...
-
Thresholds at Exterior Doors/Thresholds to Balconies or Decks
The Guidelines further provide that the finished surface of this area, located immediately outside the entry door, may be sloped for drainage, but the sloping may be no more than 1/8 inch...
-
1.0 APPLICATION
While the new or altered furnishing must be accessible the clear floor or ground space shall not be required to comply with surface and slope requirements until the surface and slope alteration...
-
Selection of Locations
The 11 test plots were installed in a previously undisturbed wetlands area where the maximum running slope of any of the sections was 7.6 percent....
-
Time periods
establishes accessibility requirements for new construction and alterations, requires that all newly constructed or altered streets, roads, or highways must contain curb ramps or other sloped...
-
Implications
The initiation of the surface deficiency score can quantify where the surface samples fail to comply with the standards for slope, cross slope, vertical change in level, or openings in the...
-
Solutions for Five Common ADA Access Problems at Polling Places
This publication provides a brief discussion of physical barriers to access in five commonly found areas at polling places: parking, sidewalks and walkways, building entrances, interior...
-
Priorities for Barrier Removal
The ADA regulations recommend the following priorities for barrier removal: Providing access to your business from public sidewalks, parking areas, and public transportation; Providing...
