Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
Search Results "Sloped Sidewalk"
-
11B-307.3 Post-mounted objects
-
Section E: Route from Entrance
(§303.3) E6 Is the running slope of part of the route greater than 1:20?...
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
Note shifting slopes and cross slopes on the ramps in addition to poor APS location. ...
-
Impacts on State and Local Governments
commonly referred to as the “AASHTO Green Book”) and the “Guide for the Planning, Design, and Operation of Pedestrian Facilities” (2004) which incorporate accessibility in the design of sidewalks...
-
Design of Shared Use Paths, Street Intersections, and Midblock Crossings
Sidewalks and "Sidepath" Design Guidance. These sections are further detailed below. 1. Section 1 - Design Controls and Criteria A. ...
-
Camping Units
Do not allow the slope of the ground surface in camp living areas to exceed 1:48 (2 percent) in any direction, except when the surface is unpaved or is not built with boards....
-
705 Detectable Warnings
The original ADAAG included a requirement for detectable warnings on the surface of curb ramps to provide a tactile cue for persons with vision impairments of the boundary between sidewalks...
-
Recitals
shall contain recitals stating that: a) The District Court made no liability findings in this case; b) The District Court made no findings that the City has, in its handling of curbs, sidewalks...
-
307 Protruding Objects
Post-mounted objects are common along sidewalks, street crossings, and other public rights-of-way....
-
Exception 4
Making curb cuts in sidewalks and entrance. Repositioning shelves. Rearranging tables, chairs, vending machines, display racks, and other furniture. Repositioning telephones....
-
1127B.1
Access shall be provided within the boundary of the site from public transportation stops, accessible parking spaces, passenger loading zones if provided, and public streets or sidewalks...
-
I. Ensuring Compliance Now and In the Future
Develop a written policy ensuring that, effective immediately, ADA-compliant curb ramps will be provided at any intersection having curbs or other barriers to entry from a sidewalk whenever...
-
810 Transportation Facilities
The Board has explicitly specified that rail platforms shall slope no more than 1:48 in any direction, consistent with cross slope provisions for walking surfaces in section 403....
-
406.7 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
307.3 Post-Mounted Objects
EXCEPTION: The sloping portions of handrails serving stairs and ramps shall not be required to comply with 307.3. Figure 307.3 Post-Mounted Protruding Objects...
-
Shooting Facilities
Fixed firing positions must have a 60-inch diameter space with slopes not steeper than 1:48 so a wheelchair user can turn around and have a level place from which to shoot....
-
Clear Deck Space
The slope of the clear deck space must not be greater than 1:48 (2%)....
-
1007.1 Accessible means of egress required
In assembly spaces with sloped floors, one accessible means of egress is required from a space where the common path of travel of the accessible route for access to the wheelchair spaces...
-
Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
The escutcheon plate is sloped at a low profile, from the door to the lever handle itself, to eliminate any further ligature points, and maintains extremely tight tolerances. ...
-
Salsbury Industries 62000 Series Double Tier 1 Wide Standard Metal Lockers
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
-
Salsbury Industries Series Triple Tier 1 Wide Standard Metal Lockers
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
-
Salsbury Industries 62000 Series Double Tier 3 Wide Standard Metal Lockers
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
-
Salsbury Industries 63000 Series Triple Tier 3 Wide Standard Metal Lockers
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
