We do not know how forward reach was measured in the UDI study....
Search Results "Mitigating Measures"
-
4.3 Reach Ranges
- ROXIMITY's Model O iBeacon
- Caroma® USA Caravelle Smart 270 One Piece Toilet
- Clarity AL10 Visual Alert System
- American Dryer, Inc eXtremeAir eXt Hand Dryer
- ROXIMITY's Model X iBeacon
- Caroma® USA Sydney Smart 305 Easy Height Elongated 1 Piece Toilet
-
Program Accessibility
Under the ADA, transition plans should have been completed by July 26, 1992, and corrective measures should have been completed by January 26, 1995....
-
11B-221.6 Semi-ambulant seats
located within the rear 60% of the seats provided in an auditorium; or (ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured...
-
Turning Radius
It should be noted that what AASHTO refers to as a friction factor is not an actual measurement of the sliding friction of the pavement surface....
-
1.0 Background
1.0 Background The standards used to ensure accessibility for people who use wheeled mobility devices like wheelchairs and scooters are based on research in anthropometry, the measurement...
-
11B-221.6 Semi-ambulant seats
located within the rear 60% of the seats provided in an auditorium; or (ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured...
-
11B-221.6 Semi-ambulant seats
i) It is located within the rear 60% of the seats provided in an auditorium; or i) It is located within the area of an auditorium in which the vertical viewing angles (as measured...
- LaCantina Folding Wood Door System
-
Play areas. (Section-by-Section Analysis)
Consequently, the Department is proposing several specific provisions and posing additional questions in an effort to both mitigate and gather information about the potential burden of the...
-
E. What are the General Requirements for Curb Ramps in the ADA Standards for Accessible Design?
. [§ 4.1.6(3)(a)(ii)] The rise is the vertical change measured from the low point at the base of the curb ramp to the high point at the other end where the sloped...
-
11B-1003.2.1 Boat slips
The cross slope specified in Sections 11B-403.3 and 11B-405.3 for gangways, transition plates, and floating piers that are part of accessible routes shall be measured in the static position...
-
Water Closet Clear Floor Space in Toilet Compartments
The 48 inch specification measured from the leading edge of the water closet is derived from the ANSI A117.1-1992 standard....
-
Receivers
The criteria recommended by this research include: a signal-to-noise ratio of at least 18 decibels measured at the earphones the capability of receivers to deliver a signal...
-
1. Abdomen depth (AD)
Abdomen depth (AD) Abdomen depth was analyzed as the overall clearance depth beneath the mammography machine, and measured from the anterior-most aspect of the abdomen to the anterior-most...
-
6.1 Deliberative Process
Box 6.1 M301.2.1 and M302.2.1 would require the height of the transfer surface during patient transfer to be 17 inches minimum and 19 inches maximum measured from the floor to the top...
-
Background
Tests were performed at regular intervals to provide a quantitative measure of accessibility....
-
Cross Slope (R302.6) (Section-by-Section Analysis)
On a sidewalk, cross slope is measured perpendicular to the curb line or edge of the street or highway....
-
Reduced Contrast Sensitivity
The way contrast sensitivity is measured is with an eye chart, but the letters are all the same size. It’s called the Pelli-Robson Chart (slide 35)....