downloadable apps Large 9” color display with simple “touch and swipe” control similar to smart phones Built-in Emperon® print system with universal printer driver for cross-platform...
Search Results "Cross Slope"
Commonly Searched Documents
- Konica Minolta bizhub C224
- 
    
  
  Re: American Specialties 9014 Surface Mounted Horizontal Baby Changing Station
  The design of the hand hold is completely sloped at about 45 degrees. My fingers slipped off unless I applied tremendous pinching force to operate.... 
- 
    
  
  Road Roughness Analysis
  (Loizos, 2008) PSD can also be evaluated in terms of roughness by plotting the PSD of elevation, PSD of slope, or vertical acceleration versus wavelength.... 
- Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
- Salsbury Industries 62000 Series Double Tier 1 Wide Standard Metal Lockers
- Salsbury Industries Series Triple Tier 1 Wide Standard Metal Lockers
- Salsbury Industries 62000 Series Double Tier 3 Wide Standard Metal Lockers
- Salsbury Industries 63000 Series Triple Tier 3 Wide Standard Metal Lockers
- 
    
  
  Entrances
  Entrances Problem The entrance area must be level (no level change greater than ½ inch) and should not slope steeply in any one direction.... 
- 
    
  
  1132A.4 Level floor or landing
  ., concrete, brick, flagstone) may have a maximum change in height from the interior landing of 1 inch (25.4 mm), provided a ramp with a maximum slope of 1:8 is permanently installed.... 
- 
    
  
  11B-1003.2.2 Boarding piers at boat launch ramps
  length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section 11B-405.2 _|Slope... 
- 
    
  
  307.3 Post-Mounted Objects
  EXCEPTION: The sloping portions of handrails serving stairs and ramps shall not be required to comply with 307.3. Figure 307.3 Post-Mounted Protruding Objects... 
- 
    
  
  Seats
  The deck surface between the centerline of the seat and the pool edge cannot have a slope greater than 1:48.... 
- 
    
  
  Access to Performing Areas [4.33.5]
  Aisles with slopes no steeper than 1:12 are often feasible in small and medium size assembly areas and permit accessible routes that coincide with general routes.... 
- 
    
  
  Landings [4.8.4]
  Landings must be at least as wide as the ramp they serve and cannot slope more than 2% in any direction. Where ramps change direction, the landing must be at least 60 by 60 inches.... 
- 
    
  
  Vertical Clearance [§307.4]
  Fixed barriers, such as guardrails, are required where the vertical clearance is less than 80” such as at open stairways and along sloped or curved walls.... 
- 
    
  
  Stairs
  At the bottom, the handrail shall continue to slope for a distance of the width of one tread from the bottom riser; the remainder of the extension shall be horizontal (see Fig. 19(c) and... 
- 
    
  
  11B-1003.2.2 Boarding piers at boat launch ramps
  length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section 11B-405.2 _|Slope... 
- 
    
  
  REFERENCES
  NCHRP Project 3-78, Crossing Solutions at Roundabouts and Channelized Turn Lanes for Pedestrians with Vision Disabilities.... 
- National Council on Independent Living (NCIL)
- ADA Fast Finder
- MOCEANS Center for Independent Living, Inc. - Long Branch and Toms River, NJ
- 
    
  
  2.6
  lines of sight comparable to those for members of the general public, (b) including wheelchair spaces as an integral part of the fixed seating plan, (c) providing the appropriate depth for cross... 
- 
    
  
  Public Rights-of-Way
  The guidelines would supplement the ADA and ABA accessibility guidelines by adding new provisions for sidewalks, street crossings, and related pedestrian facilities.... 
