The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
Search Results "Assurances from Contractors"
-
M302.4.2 Clearance Around Base
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
11B-607.4.1.1 Back wall
Each grab bar shall be installed 15 inches (381 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
11B-809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door. ◼...
-
809.5.5.2 Identification
Such peepholes can be placed at a standard height and permit a view from several feet from the door....
-
2.2 Administrative Requirements.
the public entity, and make such information available to them in such manner as the head of the entity finds necessary to apprise such persons of the protections against discrimination assured...
-
§382.111(a)
(a) Assistance in moving to and from seats, as part of the enplaning and deplaning processes;...
-
Disability Protest
Disability Protest Opposition to the delay in signing regulations developed from growing collaboration among people with disabilities....
-
607.4.1.1 Back Wall
Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall. [ECTCR UFAS 4.34.5.4(3), Fig. 48(b)]...
-
Subpart B -- General Requirements (Preamble, Section-by-Section Analysis)
Subpart B -- General Requirements Subpart B includes general prohibitions restricting a public accommodation from discriminating against people with disabilities by denying them the opportunity...
-
Common Problems with Entrances and Doors
Ø Round doorknob hardware prevents someone who cannot grasp or turn a doorknob from entering....
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
11B-607.4.2.1 Back wall
Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
M302.4.2 Clearance Around Base
The base of the diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...
-
M301.4.2 Clearance Around Base
The base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...
-
5.8.2.7 Base Support Allowance
An additional sloped region above the base support is permitted at a depth of 25 inches from the front edge of the breast platform at 1½ inches above the floor, and can extend to a height...
-
IV. Requests for Comments
While the Department has been persuaded by comments from individuals, advocacy groups, governmental entities, and at least some representatives of the movie industry that the time may be...
-
5.2.2.1 Transfer Surface Width Recommendations for M302
Rationale for final recommendation The Committee considered the dimensions for rectangular seats in roll-in showers from the 2010 Standards; and the ideal chair width recommended in Architectural...
-
Minimal protection.
Although the Department received comments urging it to eliminate the phrase "providing minimal protection" from its regulation, the Department continues to believe that the language serves...
-
225(d)(3)(B) Recovering costs
(B) Recovering costs Such regulations shall generally provide that costs caused by interstate telecommunications relay services shall be recovered from all subscribers for every interstate...
-
4.28.3(7)
(7) In general, no place in any room or space required to have a visual signal appliance shall be more than 50 ft (15 m) from the signal (in the horizontal plane)....
-
Can handrails or other elements overlap door maneuvering clearances?
However, door maneuvering clearances can be offset up to 8” from the face of the door or gate to accommodate wall thickness, casework, shelves, or other elements adjacent to doorways, including...
-
Can handrails overlap door maneuvering clearances?
However, door maneuvering clearances can be offset up to 8” from the face of the door or gate to accommodate wall thickness, casework, shelves, or other elements adjacent to doorways, including...
-
Subpart B -- General Requirements (Section-By-Section Analysis and Response to Comments)
Subpart B -- General Requirements (Section-by-Section Analysis) Subpart B includes general prohibitions restricting a public accommodation from discriminating against people with disabilities...