These reach distances were measured in 3-D at five normalized shelf heights in three different directions (lateral, forward and an intermediate 45 degrees) resulting in 15 reach data points...
Search Results "Tape Measure"
Filters
Commonly Searched Documents
-
Database Development
-
Detecto 6550 Portable Wheelchair Scale
Platform measures 30 x 32 inch (76 x 81 cm). EMR/EHR ready. 1,000 lb x 0.2 lb / 450 kg x 0.1 kg capacity. OIML EC Class III model available....
-
"Readily achievable.'' (Preamble, Section-by-Section Analysis)
The Department believes that legitimate safety requirements, including crime prevention measures, may be taken into account so long as they are based on actual risks and are necessary for...
-
Section 35.151(b) Alterations (Section-by-Section Analysis)
The Department's proposed rule would amend § 35.151(b)(2) to make clear that the path of travel requirements of § 35.151(b)(4) do not apply to measures taken solely to comply with program...
-
Links
accessibility/ Forest Service Trail Accessibility Guidelines http://www.fs.fed.us/recreation/programs/accessibility/ Forest Service Trail Design Parameters http://www.fs.fed.us/r3/measures...
-
Background
Tests were performed at regular intervals to provide a quantitative measure of accessibility and impact attenuation. An impact test was performed after the 6-month exposure period....
-
References
Measuring leisure satisfaction. Journal of Leisure Research, 12(1), 20-33. Beard, J. G., & Ragheb, M. G. (1983). Measuring leisure motivation....
-
Sections 35.108(d)(1)(v) and 36.105(d)(1)(v)—Comparisons to Most People in the Population, and Impairment Need Not Prevent or Significantly or Severely Restrict a Major Life Activity
In that example, evidence gathered to demonstrate the impairment of a learning disability showed a discrepancy between the person’s age, measured intelligence, and education and that person...
-
Standing Supports (M304.3 and M305.3)
Tilley, The Measure of Man & Woman: Human Factors in Design, (New York, John Wiley and Sons, 2002), page 43....
-
1003.2.1 Boat Slips
The cross slope specified in 403.3 and 405.3 for gangways, transition plates, and floating piers that are part of accessible routes shall be measured in the static position. 8....
-
1003.2.1 Boat Slips
The cross slope specified in 403.3 and 405.3 for gangways, transition plates, and floating piers that are part of accessible routes shall be measured in the static position. 8....
-
1003.2.1 Boat Slips
The cross slope specified in 403.3 and 405.3 for gangways, transition plates, and floating piers that are part of accessible routes shall be measured in the static position. 8....
-
4.4 Mammography Equipment
Breast cancers occur in men, although rarely.DD Therefore, since women are the primary users of this equipment, the Committee focused on anthropometric measurements of women when possible...
-
Do facilities in remote locations have to be accessible?
The decision not to make a facility accessible in accordance with the full UFAS/ADDAG standards, occurs only when the measures needed to meet the accessibility guidelines would fundamentally...
-
Issue 12: What design guidance on natural lighting for low vision persons can be provided in the short term?
Comment by [Participant]: But the fundamental problem today is we’re not measuring it....
-
Accessible Routes Throughout the Museum
If people must travel between stanchions or between a wall and a stanchion, passage must be maintained at a minimum of 36 inches wide, measured from inside edge to inside edge of the stanchion...
-
11B-302.2 Carpet
A pile thickness up to ½ inch (13 mm) (measured to the backing, cushion, or pad) is allowed, although a lower pile provides easier wheelchair maneuvering....
-
4.3.1 Reference WhMD Users
Tables showing results from the structural measurements of these three dimensions are provided in Appendix 2....
-
3.3.1 Unoccupied Device Width
But, the widest device measured (a manual wheelchair) was over 300 mm (12 in.) wider than the U.S. standard’s reference wheelchair....
-
2.1 Participants’ Vision
This group is shown by the “N” label on the left side of the abscissa to indicate that their contrast sensitivity was not measurable with this test....
-
Appendix E: Vision Tests
The luminance of the white areas of the chart was measured with a Minolta LS-100 luminance meter in nine separate locations and ranged from 65cd/m2 to 119 cd/m2, which is within the recommended...
-
Section 36.306 Personal Devices and Services (Section-By-Section Analysis and Response to Comments)
The Department wishes to clarify that measures taken as alternatives to barrier removal, such as retrieving items from shelves or providing curb service or home delivery, are not to be considered...
-
8. What is an Olmstead Plan in the state and local government employment service system context?
Plans should include specific and reasonable timeframes for the employment of persons with disabilities in integrated employment settings; measurable goals for which the public entity may...
-
11B-302.2 Carpet
A pile thickness up to ½ inch (13 mm) (measured to the backing, cushion, or pad) is allowed, although a lower pile provides easier wheelchair maneuvering....
