Combination refrigerators and freezers shall have at least 50 percent of the freezer space 54 inches (1372 mm) maximum above the finish floor or ground....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
11B-804.6.6 Refrigerator/freezer
-
11B-804.6.6 Refrigerator/freezer
Combination refrigerators and freezers shall have at least 50 percent of the freezer space 54 inches (1372 mm) maximum above the finish floor or ground....
-
5.4.2 Transfer Support Length for M301 and M302
NPRM Preamble Discussion: The Access Board is considering whether the following technical criteria would be appropriate for the location and size of transfer supports....
-
3. Lift Compatibility Exception
The MDE Advisory Committee reviewed this issue and recommended the use of overhead lifts as an alternative for imaging equipment where portable floor lifts are not feasible....
-
2. Usability and Performance Standards
We also sought comment on the feasibility and value of requiring airlines to seek feedback from the disability community on the accessibility of their Web sites through periodic monitoring...
-
§ 382.21 Aircraft accessibility
(ii) Such armrests are not required to be provided on aisle seats on which a movable armrest is not feasible or aisle seats which a passenger with a mobility impairment is precluded from...
-
Alteration
but are not limited to, remodeling, renovation, rehabilitation, reconstruction, historic restoration, resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural...
-
1.1.8.2 Locally adopted energy standards - California Energy Code, Part 6.
provisions of Section 1.1.8.1 of this part, the provisions of this section shall apply to a city, county, and cities and counties adopting local energy standards applicable to buildings and structures...
-
Center on Technology and Disability (CTD)
CTD has established a robust online Open Institute, through which we provide information resources, personal and professional development (PPD) activities, and universal and targeted technical...
-
§104.5(b)(1)
(1) In the case of Federal financial assistance extended in the form of real property or to provide real property or structures on the property, the assurance will obligate the recipient...
-
§8.50(b)(1)
(1) In the case of Federal financial assistance extended in the form of real property or to provide real property or structures on the property, the assurance will obligate the recipient...
-
Accessible Route
Section 1003.2.1 provides a list of exceptions applicable to structures such as gangways, transition plates, floating piers, and structures containing combinations of these elements that...
-
12188(a)(2) Injunctive relief
Section 12183(a) of this title, injunctive relief shall include an order to alter facilities to make such facilities readily accessible to and usable by individuals with disabilities to the extent...
-
11B-202.3.1 Prohibited reduction in access
If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the number...
-
Components (M303.4)
M303.4.1 would require the height of the breast platform to be 30 inches (760 mm) high minimum and 42 inches (1065 mm) high maximum above the floor when mammography equipment is used by...
-
Section 35.136 Service Animals (Section-by-Section Analysis)
In the proposed title II language, the Department intends to provide the broadest feasible access to individuals with disabilities who use service animals, unless a public entity can demonstrate...
-
11B-1003.3.2 Boarding pier clearances
Every 10 feet (3048 mm) maximum of linear pier edge shall contain at least one continuous clear opening 60 inches (1524 mm) wide minimum....
-
18. Inspections
During the Compliance Period, Class Counsel shall have reasonable access to the City’s designs and drawings for street projects, to the extent that such designs and drawings are prepared...
-
Medical Device Manufacturers
The following questions in the preamble request comments on the incremental costs to design or redesign and manufacture accessible products that conform to the technical criteria in the...
-
Knee and Toe Clearance (M303.2.4)
M303.2.4 would require the depth of wheelchair spaces to include knee and toe clearance of 17 inches minimum and 25 inches maximum....
-
Deaf Vote
Resources for Deaf Voters National Association of the Deaf’s Making Polls Accessible to Deaf and Hard of Hearing Voters website Self Advocates Becoming Empowered’s National Technical...
-
106.5 Defined Terms, F106.5 Defined Terms
The definition lists travel trailers, park models, manufactured housing, and other factory built housing among the structures covered by the definition....
-
Dumpster Enclosure
Just as an FYI, Texas has a Technical Memorandum that briefly addresses dumpster enclosures. It is TM 2013-21....
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
