ADA compliance is dependent on 27” knee clearance under counter and 34” maximum counter height. Spray heads swing down from storage to operational position, activating water flow....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
Commonly Searched Documents
- Guardian Barrier-Free Eyewash: Deck Mounted, AutoFlow™ 90º Swing-Down GBF1849
-
11B-202.3.1 Prohibited reduction in access
If the 2010 Standards reduce the technical requirements or the number of required accessible elements below the number required by the 1991 Standards, the technical requirements or the number...
-
11B-608.5.3 Alternate roll-in type shower compartments
shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum and 27 inches (686 mm) maximum...
-
11B-226.4 Baby changing tables
This has been generally understood to include the technical requirements for accessible routes, clear floor space, reach ranges, knee and toe space, worksurface heights, operable parts and...
-
Additional Number and Types: ADA Standard Section 240.2.1.2
Section 240.2.1.2 covers scoping requirements in the current ADA Standards for additional number and types of ground level play components.
-
11B-201.1 Scope
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
11B-240.2.1.2 Additional number and types
Where a large play area includes two or more composite play structures designed for the same age group, the total number of elevated play components on all the composite play structures...
-
Position of Grab Bars: ADA Standard Section 609.4
Section 609.4 covers the current ADA Standards for the position of grab bars.
-
Spout Height: ADA Standard Section 602.4
Section 602.4 covers the current ADA Standards for the spout height of drinking fountains.
-
11B-602.4 Spout height
Spout outlets shall be 36 inches (914 mm) maximum above the finish floor or ground....
-
Sec.36.501(b) Injunctive relief
, and 36.405 of this part, injunctive relief shall include an order to alter facilities to make such facilities readily accessible to and usable by individuals with disabilities to the extent...
-
F216.13 Trailhead Signs
requirements in 1017.11, regardless of whether the trails comply with the technical requirements in 1017....
-
707.1 General
Place accessible gates and fare vending machines in close proximity to other accessible elements when feasible so the facility is easier to use....
-
707.1 General
Place accessible gates and fare vending machines in close proximity to other accessible elements when feasible so the facility is easier to use....
-
707.1 General
Place accessible gates and fare vending machines in close proximity to other accessible elements when feasible so the facility is easier to use....
-
M302.3.3 Head and Back Support (Section-by-Section Analysis)
In the final rule the Access Board has decided to move the technical requirements for head and back support to M305 which includes all of the technical requirements for supports....
-
M301.3.3 Head and Back Support (Section-by-Section Analysis)
In the final rule, the Access Board has decided to move the technical requirements for head and back support to M305, which includes all of the technical requirements for supports....
-
Accessible Routes: ADA Standard Section 1007.2
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
§40.2(b)(2)
(2) All elevator residential structures;...
- Speakman Versatile Shower Combination VS-2054
-
6. PROJECT COST DETERMINATION:
review shall not include the cost of air-conditioning equipment1 and insulation materials2, and installation cost of such equipment and materials when such installation does not cause structural...
-
[A] 111.2 Certificate issued
After the building official inspects the building or structure and finds no violations of the provisions of this code or other laws that are enforced by the department of building safety...