Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
11B-903.4 Back support
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
F216.13 Trailhead Signs
requirements in 1017.11, regardless of whether the trails comply with the technical requirements in 1017....
-
R401 General (Section-by-Section Analysis)
R401 General (Section-by-Section Analysis) The supplementary technical requirements in Chapter R4 apply where required by scoping requirements in Chapter R2, or where referenced by another...
-
Which transition type do users with disabilities prefer?
When a sidewalk slopes more than 2% in the direction of travel and a walk with a maximum 2% cross slope intersects it, which transition segment type provides the safest usability for the...
-
Mobile Web Sites, Mobile Apps, and Other Electronic Communication Technology
We also requested input on the costs and technical feasibility of ensuring that such content is accessible....
-
Element-by-element safe harbor for public accommodations. (Section-by-Section Analysis)
Commenters from the disability community argued that the revised maximum side-reach range (from 54 inches to 48 inches) will result in a substantial increase in accessibility for many persons...
-
Designed Use
trail that requires the most demanding design, construction, and maintenance parameters and that, in conjunction with the applicable Trail Class, determines which Design Parameters or technical...
-
Impacts on State and Local Governments
All three accessibility standards would be basically uniform because they adopt the proposed guidelines, but may vary to the extent that Department of Justice, Department of Transportation...
-
Speakman Company Shower & Bath Collections Neo™ Collection SA-1006 Coat Hook
Technical Specifications Solid metal construction 2.2-inches in length Includes mounting hardware...
-
F234.1 General
In those situations, these requirements are to be applied to the extent possible....
-
234.1 General
In those situations, these requirements are to be applied to the extent possible....
-
234.1 General
In those situations, these requirements are to be applied to the extent possible....
-
Running Slope [1017.7.1]
Table 2—Maximum Running Slope and Segment Length Running Slope of Trail Segment Maximum Length of Segment Steeper Than But Not Steeper Than ...
-
Outdoor Constructed Features
40 percent of these elements that complied with the applicable technical requirements to be on an outdoor recreation access route....
-
Sec.36.501(b) Injunctive relief
, and 36.405 of this part, injunctive relief shall include an order to alter facilities to make such facilities readily accessible to and usable by individuals with disabilities to the extent...
-
Surfaces (R302.7) (Section-by-Section Analysis)
An advisory section lists the accessible elements and spaces that connect to pedestrian access routes and are required to comply with the technical requirements for surfaces....
-
Character Spacing: ADA Standard Section 703.2.7
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
11B-703.2.7 Character spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
