1-1/4" O.D. Exposed Mounting Heavy Duty Stainless Steel
Search Results "Vertical Actuation Bar"
Filters
Commonly Searched Documents
-
Bradley Grab Bars 1 1/4" with Exposed Mounting 837
-
Bradley Grab Bars 1 1/4" with Concealed Mounting 832
1-1/4" O.D. Concealed Mounting Heavy Duty Stainless Steel
-
Grab Bar
Grab Bar—A bar attached to a wall to provide a handgrip for steadying oneself or to assist in transferring across short distances....
-
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis)
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis) This section proposes that, where a side approach is provided, the vertical reference plane must have a minimum...
-
407.12.1.2 Vertical Plane for Forward Reach (Section-by-Section Analysis)
407.12.1.2 Vertical Plane for Forward Reach (Section-by-Section Analysis) This section proposes that, where a forward reach is provided, the vertical reference plane must be, at a minimum...
-
11B-609 Grab bars
11B-609 Grab bars....
-
Gamco 1.25 Inch Diameter Straight Grab Bar with Snap Flange - 125S Series - Snap
Description 12" (305mm), 18" (455mm), 24" (610mm), 30" (760mm), 36" (915mm), 48" (1220mm) standard lengths. 125 Series - 1 1/4" (32mm) diameter stainless steel. Tubing -...
-
Gamco 1.5 Inch Diameter Straight Grab Bar with Concealed Flange - 150C Series-Concealed
Description 18" (455mm), 24" (610mm), 30" (760mm), 36" (915mm), 42" (1060mm), 48" (1220mm) standard lengths. 150 Series - 1 1/2" (38mm) diameter stainless steel. Tubing -...
-
Gamco 1.5 Inch Diameter Straight Grab Bar with Snap Flange - 150S Series-Snap
Description 12" (305mm), 18" (455mm), 24" (610mm), 30" (760mm), 36" (915mm), 48" (1220mm) standard lengths. 150 Series - 1 1/2" (38mm) diameter stainless steel. Tubing -...
-
WET BAR
WET BAR. [DSA-AC] An area or space with a counter equipped with a sink and running water but without cooking facilities....
-
23.1 Q. What type of reinforcement should be used to reinforce bathroom walls for the later installation of grab bars?
The Guidelines recognize that grab bar reinforcing may be accomplished in a variety of ways, such as by providing plywood panels in the areas illustrated in the Guidelines under Requirement...
-
Rear Wall: ADA Standard Section 604.5.2
Section 604.5.2 covers the current ADA Standards for rear wall grab bars that are used for water closets.
-
4.20.4 Grab Bars
4.20.4 Grab Bars....
-
A4. Vertical Clearance
For van-accessible spaces, is there vertical clearance of at least 98 inches (8 feet - 2 inches) for the vehicle route to the parking space, the parking space, the access aisle and along...
-
11B-604.5.2 Rear wall
Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall...
-
11B-503.5 Vertical clearance
pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide a vertical...
-
Surface Hazards: ADA Standard Section 609.5
Section 609.5 covers the current ADA Standards for the surfaces of grab bars and adjacent surfaces.
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-608.3 Grab bars
11B-608.3 Grab bars. Grab bars shall comply with Section 11B-609 and shall be provided in accordance with Section 11B-608.3....
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
11B-608.3 Grab bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
11B-607.4 Grab bars
11B-607.4 Grab bars. Grab bars for bathtubs shall comply with Section 11B-609 and shall be provided in accordance with Section 11B-607.4.1 or 11B-607.4.2....
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
4.6.6 VERTICAL CLEARANCE
Provide minimum vertical clearances of 114 in at accessible passenger loading zones and along vehicle access routes to such areas from site entrances....
