If the clear floor space allows parallel approach by a person in a wheelchair, the maximum high side reach allowed shall be 54 in (1370 mm) and the low side reach shall be no less than 9...
Search Results "Push Side"
-
4.2.6* SIDE REACH
-
Are side flares required at curb ramps?
The ADA Standards do not require that curb ramps have side flares, but limit the slope (1:10 max.) where they are provided....
-
4.2.6* Side Reach
If the clear floor space allows parallel approach by a person in a wheelchair, the maximum high side reach allowed shall be 54 in (1370 mm) and the low side reach shall be no less than 9...
-
SDC Round Push Plate Switch
4 ½” Round Push Plate Switch...
-
Deltrex S106 Series Push Plate Switch
106 Series Push Plate Switches consist of Narrow Security Push Plate on Narrow Back Plate. A full list of customizable options are available....
-
SDC Square Push Plate Switch
6” x 6” Square Push Plate Switch...
-
SDC Square Push Plate Switches
4 ½” x 4 ½” Square Push Plate Switches...
-
Deltrex T106 Series Push Plate Switch
106 Series Push Plate Switch consist of Narrow Push Plate on a 1-gang box Back Plate....
-
Deltrex F106 Series Push Plate Switch
106 Series Push Plate Switch consist of a 1-gang Push Plate on a 1-gang box Back Plate. A full list of customizable options are available....
-
Deltrex D106 Series Push Plate Switch
106 Series Push Plate Switch consist of a 2-gang Push Plate on a 2-gang box Back Plate....
-
SDC Gang Push Plate Switch
2¾” x 4½” Single (1) Gang Push Plate Switch....
-
Deltrex J109 Jumbo Push Plate Switch
J106 Series Push Plate Switch consist of a 2-gang Push Plate on a 2-gang box Back Plate....
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
onto one short side (depth) and one long side (width) of the surface, and provide unobstructed transfer to the surface....
-
SDC 6” Round Push Plate Switch
6” Round Push Plate Switch...
-
Location: ADA Standard Section 406.5
Section 406.5 covers the current ADA Standards for the location of curb ramps.
-
5.3.2 Transfer Sides Recommendations for M301
5.3.2 Transfer Sides Recommendations for M301 Description: The transfer side provision requires the transfer surface to be located to provide options to transfer onto the short side and...
-
5.3.2 Transfer Sides for Equipment Used by Patients in a Supine, Prone, or Side-Lying Position
5.3.2 Transfer Sides for Equipment Used by Patients in a Supine, Prone, or Side-Lying Position....
-
Activar Hiawatha 5-1/2P Series Pull with Matching Push Plate
Cast Pull Combined with Coordinating Push Plate Gives Your Door A Finished Look and a Durable Finish. The most popular Hiawatha pull plate combinations are shown here....
-
404.2.11 Vision Lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
404.2.11 Vision Lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
Figure 703.4.2 Location of Tactile Signs at Doors – Drawing from the U.S. Access Board
-
404.2.11 Vision Lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
11B-604.5.1 Side wall
The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
-
11B-404.2.11 Vision lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
