6”Rd X48.625” Tall, Satin Stainless Steel US32D (630). Surface mount with concealed mounting base. Recessed area for N4x4S Surface Mount Box for with 4x4-5 US32D (630). Welded Angle...
Search Results "Push Side"
-
Wikk Industries Inc. Bollard With Push Plate PART#BPR SM AINS 32D (630)
-
12 [§ 4.7.9]
The flared sides of a curb ramp do not have to be within the marked crossing....
-
M19
Is a horizontal grab bar at least 40 inches long securely mounted on the adjacent side wall 33 to 36 inches above the floor with one end no more than 12 inches from the back wall?...
-
H21
Is a horizontal grab bar at least 40 inches long securely mounted on the adjacent side wall 33 to 36 inches above the floor with one end no more than 12 inches from the back wall 33 to 36...
-
Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
The Push/Pull design commonly known for its ease of operation is coupled with the strength and integrity of a mortise lock to provide greater versatility....
-
SDC Bollard Post with Push Plate or Touch Panel
Request-to-Exit Applications • Door Opener Activation • Access Control Request-to-Exit (RTE) • Automatic Door Activation • Door Sequencer Activation Features: For use with Push...
-
Clear Floor Space [4.25.2] and Height [4.25.3]
Clear Floor Space [4.25.2] and Height [4.25.3] Clear floor space for either a forward or side approach is allowed....
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
provide options to transfer onto the short side and the long side of the surface....
-
609.4 Side Wall Grab Bar Height
-
Rockwood Manufacturing Company 107 x 73B/73BL Concealed Mount Pull Plate 8" CTC Pull 3-1/2" x 15" Plate
Stud welded lugs on the back of the push plate are permanently attached to the 1/8" thick push plate. Cone Head MS attached to selected door pull....
-
Rockwood Manufacturing Company 596 Hospital Push Pull Latch 5" Backset
OPTIONS: • Engraved "PUSH" or "PULL". • Lead lined....
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
Medical Diagnostic Equipment Accessibility Standards Sub Committee Recommendations Stretcher Final Report
Specifically, Section M301, Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position....
-
Top Landing [§406.4]
Side flares, where provided, are intended primarily to prevent tripping hazards, not to accommodate wheelchair maneuvering at ramps (except in alterations where sufficient landing space...
-
5.6.1 Stirrups for Equipment Used by Patient in Supine, Prone, or Side-Lying Position
5.6.1 Stirrups for Equipment Used by Patient in Supine, Prone, or Side-Lying Position....
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area on the side to which the door swings shall extend 18 inches (457 mm) past the strike edge for all doors....
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area on the side to which the door swings shall extend 18 inches (457 mm) past the strike edge for all doors....
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area on the side to which the door swings shall extend 18 inches (457 mm) past the strike edge for all doors....
-
Plantronics Clarity Ensemble TTY Phone
Requires the Registered User plan or above. Login! -
Rockwood Manufacturing Company 596S Hospital Push Pull Latch 2-3/4" Backset
OPTIONS: • Engraved "PUSH" or "PULL". • Lead lined....
-
4.7.10 DIAGONAL CURB RAMPS
If diagonal curb ramps have flared sides, they shall also have at least a 24 in (610 mm) long segment of straight curb located on each side of the curb ramp and within the marked crossing...
-
4.7.10 Diagonal Curb Ramps
If diagonal curb ramps have flared sides, they shall also have at least a 24 in (610 mm) long segment of straight curb located on each side of the curb ramp and within the marked crossing...
