The rear wall grab bar shall be 36 inches (914 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on...
Search Results "Lavatory Centerline"
Filters
Commonly Searched Documents
-
11B-604.5.2 Rear wall
-
H9
Are the drain and hot water pipes for this lavatory insulated or otherwise configured to protect against contact? [ADA Standards § 4.19.4] Yes No...
-
Sioux Chief DropKick™ Offset Flange 889-45PAM
Full-flow, 3" I.D. throat – no restriction Solvent welds inside 3" Sch. 40 fitting hub Corrosion-resistant 430 stainless steel swivel ring is engineered for maximum...
-
Oatey Level Fit Offset Closet Flange Metal Ring 43501 - PVC
The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. Solvent welds inside of 4" or...
-
Oatey Level Fit Offset Closet Flange Metal Ring 43804 - PVC Bulk
The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. Solvent welds inside of 4" or...
-
Oatey Level Fit Offset Closet Flange Metal Ring 43500 - ABS 15150
The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. Solvent welds inside of 4" or...
-
Sioux Chief FullFlush™ Offset Flange 889-AOM
Full-flow, 3" I.D. throat – no restriction Allows for 1?½" offset in any direction for closet bowl setting Corrosion-resistant 430 stainless steel swivel ring is engineered...
-
Zurn Z1209 Vertical Offset Siphon Jet Water Closet Support System
FEATURES: Vertical, offset water closet carrier 300 lb. load capacity
-
11B-306.3.3 Minimum required depth
At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth of 8 inches (203 mm...
-
11B-306.3.3 Minimum required depth
Exceptions: At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-306.3.3 Minimum required depth
Exceptions: At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the following...
-
Sioux Chief Closet Flanges Demonstration Video
Sioux Chief offers a wide variety and complete line of closet flanges. Innovative design can be seen and experienced with our TKO™ closet flange, with and without stainless steel...
-
Sioux Chief Closet Flange Family Animation Video
Sioux Chief's closet flanges do what flanges are designed to do — anchor the toilet to the floor and make a secure connection to the drain. And they do so with the quality and...
-
11B-809.10.8.6 Controls
Faucet controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-809.10.8 Lavatories, vanities, mirrors and towel bars
Bathing rooms or powder rooms required to comply with Section 11B-809.10 shall provide lavatories complying with this section....
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
Sinks [F212.3, Exception 2]
Lavatories must comply with the technical requirements for lavatories in section 606 of the ABA Standards....
-
Sinks [4.24]
Sinks [4.24] ADAAG provides technical specifications for both "lavatories" and "sinks."...
-
Clear Floor Space [4.19.3]
Recommendations:Consider locating towel dispensers within reach from the lavatory so that people can dry their hands before maneuvering wheelchairs....
-
Just Manufacturing Oval Lavatory Group Drop-in Sink with Overflow
Drain punched for standard lavatory drain. Connected overflow. included. Product: LOLF-ADA-17519-A-GR...
-
M9
Does the lavatory have at least a 29-inch-high clearance under the front edge and the top of the rim no more than 34 inches above the floor?...
-
Willoughby Industries CEL-Multi-Station Lavatory Series
Lavatory shall be Willoughby Model No. CEL Lavatory shall accommodate from1 to 3 users simultaneously. Fixture shall be fabricated from 14 gauge, type 304 stainless steel....
-
1134A.8, Item 5
The finished floor beneath the lavatory shall be extended to the wall....
