The Department believes that the limitations on the effective communication requirements, which provide that a covered entity does not have to take measures that would result in a fundamental...
Search Results "Tape Measure"
Commonly Searched Documents
-
ATMs. (Section-by-Section Analysis)
-
2.1.3. Baseline
To estimate the incremental cost impact, the total costs are measured against a baseline. ...
-
MISCELLANEOUS PROVISIONS
Reports will include detailed photographs showing measurements, architectural plans, work orders, notices published in the newspaper, copies of adopted policies, and proof of efforts to...
-
Study Limitations
Third, measurements were taken on only individual users, not users traveling side-by-side or one in front of the other....
-
¼ Inch Minus Limestone
Eventually, the surface developed an erosion ditch measuring approximately 16 feet and at a depth of approximately 3 inches....
- The UpScale Medical Exam Table
- Stable and rock solid. See for yourself!
- Bradley Soap Dispenser With ABS Plastic Valve 6563
- Yale 8800 Series Grade 1 Mortise Locks
- Bradley Surface Mounted Tank-Type Vertical Valve Soap Dispenser 6562
- Bradley Standard Series Vertical Recessed Soap Dispenser
- Bradley Surface Mounted, Horizontal Tank, Horizontal Valve Soap Dispenser 6542
- Audio Description Associates Audio Description Services
-
COMMENTS
The Department believes that legitimate safety requirements, including crime prevention measures, may be taken into account so long as they are based on actual risks and are necessary for...
-
Appendix One: List of References
Measuring the influences of physical environments on the behaviors of people with impairments. ....
-
DEFINITIONS
electronic and information technology; or other methods of making aurally delivered information available to individuals who are deaf or hard of hearing; and Qualified readers, taped...
-
[2010 ADAS] 105.2.3 ASTM
ASTM F 1292-99 and ASTM F 1292-04 establish a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and...
-
John Brabyn, Ph.D., Director of Rehabilitation Engineering Research, Center on Low Vision and Blindness (NIDRR), Smith-Kettlewell Eye Research Institute
function comprehensively in an older population To explore relationships between vision function and visual task performance Study Population (slide 11) Visual Function Measures...
-
The Advance Notice of Proposed Rulemaking
regulatory analysis under the guidance provided in OMB Circular A-4, available at http://www.whitehouse.gov/omb/circulars/a004/a-4.pdf, Sections D (Analytical Approaches) and E (Identifying and Measuring...
-
III-4.4500 Priorities for barrier removal
Public accommodations are free to exercise discretion in determining the most effective "mix" of barrier removal measures to undertake in their facilities....
-
11B-604.8.1.2 Doors
404 except that if the approach is from the push side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 48 inches (1219 mm) minimum measured...
-
ASTM
ASTM F 1292 establishes a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment...
-
Solutions for Five Common ADA Access Problems at Polling Places
While locating polling places in accessible facilities makes ADA compliance more likely, there may be times when that is not possible and the use of temporary measures to provide access...