Employee workstations shall be on an accessible route complying with Division 4....
Search Results "Shall"
-
11B-203.9 Employee workstations
-
11B-203.9 Employee workstations
Employee workstations shall be on an accessible route complying with Division 4....
-
1.1.10 Availability of codes
At least one complete copy each of Titles 8, 19, 20, 24, and 25 with all revisions shall be maintained in the office of the building official responsible for the administration and enforcement...
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
11B-222.2 Coat hooks and shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.5....
-
Transfer Steps: ADA Standard Section 1009.5.4
Transfer step height shall be 8 inches (205 mm) maximum....
-
Height: ADA Standard Section 1005.2.1
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
Signal Type: ADA Standard Section 407.4.8.2.1
Section 407.4.8.2.1 covers the current ADA Standards for the signal type of audible elevator car indicators.
-
Special Holding Cells and Special Housing Cells: ADA Standard Section 232.3
Section 232.3 covers scoping requirements in the current ADA Standards for special holding cells and special housing cells.
-
11B-903.3 Size
Benches shall have seats that are 48 inches (1219 mm) long minimum and 20 inches (508 mm) deep minimum and 24 inches (610 mm) deep maximum. [2010 ADA Standards] 903.3 Size....
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
11B-222.2 Coat hooks and shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.5....
-
Court-Floor Holding Cells: ADA Standard Section 231.3.2
Section 231.3.2 covers scoping requirements in the current ADA Standards for court-floor holding cells.
-
Back Wall: ADA Standard Section 607.4.1.1
Section 607.4.1.1 covers the current ADA Standards for back wall grab bars in bathtubs with permanent seats.
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the horizontal...
-
Clear Width: ADA Standard Section 403.5.1
Section 403.5.1 covers the current ADA Standards for the clear width of walking surfaces that are part of an accessible route.
-
11B-208.2.3.3 Parking for guests, employees, and other non-residents
Where parking spaces are provided for persons other than residents, parking shall be provided in accordance with Table 11B-208.2....
-
11B-208.2.3.3 Parking for guests, employees, and other non-residents
Where parking spaces are provided for persons other than residents, parking shall be provided in accordance with Table 11B-208.2....
-
11B-903.3 Size
Benches shall have seats that are 48 inches (1219 mm) long minimum and 20 inches (508 mm) deep minimum and 24 inches (610 mm) deep maximum. [2010 ADA Standards] 903.3 Size....
-
Fittings: ADA Standard Section 505.9
Section 505.9 covers the current ADA Standards for handrail fittings.
-
Operable Parts: ADA Standard Section 811.4
Operable parts shall comply with 309....
-
Kitchens and Kitchenettes: ADA Standard Section 212.2
Section 212.2 covers scoping requirements in the current ADA Standards for kitchens and kitchenettes.
-
Pool Stairs: ADA Standard Section 1009.6
Pool stairs shall comply with 1009.6....