11B-703.4.1 Height above finish floor or ground. Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the...
Search Results "Meeting Room"
-
11B-703.4.1 Height above finish floor or ground
-
11B-809.10.5.3 Controls
Controls and operating mechanisms shall comply with Section 11B-309.4. Exception: Shower spray units are not required in bathtubs.
-
11B-216 Signs
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
11B-703 Signs
[See subsections ...]
-
Arranging an Accessible Meeting Space
Arranging an Accessible Meeting Space...
-
Presenting Meeting Content Accessibly
Presenting Meeting Content Accessibly...
-
Toilet Rooms that occasionally behave as Dressing Rooms
If the space serves dual purposes, it must meet the requirements for each type of space....
-
16. Meetings with Class Counsel
Meetings with Class Counsel During the first five (5) years of the Compliance Period, the Parties shall, if requested by Class Counsel, meet on a bi-annual basis to discuss the City’...
-
Line Spacing: ADA Standard Section 703.5.9
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height.
-
11B-703.5.9 Line spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height.
-
11B-703.5.9 Line spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height.
-
Example 1: With Cooking Facilities
With Cooking Facilities An employee break room with fixed or built-in range cooking facilities shall comply with the requirements of 212 and 804 for kitchens and kitchenettes....
-
11B-703.4.2 Location
Where provided, signs identifying permanent rooms and spaces shall be located at the entrance to, and outside of the room or space. ...
-
11B-703.4.2 Location
Where provided, signs identifying permanent rooms and spaces shall be located at the entrance to, and outside of the room or space....
-
11B-703.4.2 Location
Where provided, signs identifying permanent rooms and spaces shall be located at the entrance to, and outside of the room or space. ...
- Signaids Men's Washroom Sign
-
Section 35.151(e) Social service center establishments (Section-by-Section Analysis)
requirement in the transient lodging standards and as a result, the Department proposed adding a provision that would require certain social service center establishments that provide sleeping rooms...
-
Washing Machines; Clothes Dryers— Sections 214.2 and 214.3 of the 2010 Standards
UFAS requires front loading washing machines and clothes dryers in common use laundry rooms in facilities serving accessible residential dwelling units.20 UFAS’ requirements for front-loading...
-
Meeting ANSI Standard S12.60 Requirements
Designing a classroom to meet the acoustical requirements of the ANSI standard is neither difficult nor costly....
-
11B-703.1.1.2 Inspection
Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final certificate of occupancy per...
-
§301(7)(F)
A laundromat, dry-cleaner, bank, barber shop, beauty shop, travel service, shoe repair service, funeral parlor, gas station, office of an accountant or lawyer, pharmacy, insurance...
-
ADA For Lodging: Best Practices and Standards
Have a 5 Star Rating for Accessibility and Inclusion