Transfer supports shall be provided for use with the transfer sides required by M302.2.3 and shall comply with M305.2....
Search Results "Push Side"
-
M302.3.1 Transfer Supports
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
11B-206.2.12 Court sports
In court sports, at least one accessible route shall directly connect both sides of the court....
-
11B-206.2.12 Court sports
In court sports, at least one accessible route shall directly connect both sides of the court....
-
11B-1002.4.6 Approach
One side of the wheelchair space shall adjoin an accessible route when in the load and unload position....
-
Halsey Taylor Bi-Level HAC Green Cooler with Hydroboost® Bottle Filler
Includes self-closing, light touch front and side pushbar actuation with raised letters for the visually impaired....
-
11 [§ 4.7.6]
Built-up curb ramps should have flared sides with a slope of 10 percent or less or have edge protection and handrails on the sides....
-
1. Location
Curb ramps must be placed to enable a person with a mobility disability to travel from a sidewalk on one side of the street, over or through any curbs or traffic islands, to the sidewalk...
-
406.4 Landings
The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing....
-
Location of Controls
In transfer compartments, controls, faucets, and shower spray units were to be located no more than 15 inches on either side of the seat centerline, according to the proposed rule (608.5.1...
-
H1
[ADA Standards § 4.30.6] Yes No If No, install a sign with raised characters and Braille on the wall adjacent to the latch side of the door and centered 60 inches above the...
-
4.30.6 Mounting Location and Height
Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
10.3.1(5)
Signs shall be placed at frequent intervals and shall be clearly visible from within the vehicle on both sides when not obstructed by another train....
-
11B-410.6 Doors and gates
Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
11B-410.6 Doors and gates
Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
Norton 5600 Series Low Energy Operator
Available for push or pull mounting, this unit can be operated manually or activated by wall switches, or radio frequency devices....
-
Rockwood Manufacturing Company 11047 Series 47 Straight Single Bar Set 8" Pull CTC
Metal: T4 Back to Back and Concealed; Pull Free End = 6, Push Free End = 6, Common End = 5....
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on both sides....
-
§ 1194.22(e)
(e) Redundant text links shall be provided for each active region of a server-side image map....
-
T602.3 Approach
One full unobstructed side of each wheelchair space shall adjoin or overlap a passenger access route....
-
d-ii
Are handrails installed on both sides of each ramp segment? [ADA Standards § 4.8.5] Yes No...
-
f-ii
Are handrails installed on both sides of each ramp segment? [ADA Standards § 4.8.5] Yes No...
-
Sec.36.308(a)(1)(i)
(i) Provide a reasonable number of wheelchair seating spaces and seats with removable aisle-side arm rests; and...
