Similar to auditoriums exhibiting digital movies, auditoriums exhibiting analog movies also require captioning hardware, audio description hardware, captioning devices, and audio description...
Search Results "Compartment Hardware"
Filters
Commonly Searched Documents
-
6.3. Auditoriums Exhibiting Analog Movies
-
§382.121(a)
permit passengers with a disability to bring the following kinds of items into the aircraft cabin, provided that they can be stowed in designated priority storage areas or in overhead compartments...
-
§382.127(a)
(a) Whenever baggage compartment size and aircraft airworthiness considerations do not prohibit doing so, you must, as a carrier, accept a passenger's battery-powered wheelchair or other...
-
4.29.3* TACTILE WARNINGS ON DOORS TO HAZARDOUS AREAS
example, doors to loading platforms, boiler rooms, stages, and the like) shall be made identifiable to the touch by a textured surface on the door handle, knob, pull or other operating hardware...
-
413.1.2 Audio Description Controls (Section-by-Section Analysis)
413.1.2 Audio Description Controls (Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides controls for program selection, such ICT...
-
§382.67(e)
., that it is easier for the carrier if the wheelchair is stowed in the cargo compartment)....
-
§ 38.23(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment and...
-
Equipment for Persons with Vision Impairments [4.34.5]
Even touch-screens with appropriate software and hardware can be made accessible to persons who are blind....
-
§ 38.23(b)(1) Design load
Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
§ 38.95(b)(1) Design load
Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
§ 38.125(b)(1) Design load
Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
§ 38.83(b)(1) Design Load
Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
UMEA Waste Receptacle
Constructed of painted steel and suitable for both indoors and outdoors, UMEA models can be 1, 2 or 3-compartments wide -- each with selectable top inserts and corresponding front graphics...
-
Urinals
Such toilet rooms will still be required to provide an accessible toilet compartment. Commenters urged that the exception be eliminated....
-
§ 38.159(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph (b)(2) prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
2. a. iii. Costs
issues that should be evaluated in choosing a new business location: Adequate accessible parking, Accessible entrance, Doors at entrances, Accessible door hardware...
-
Is compliance on both sides of a door or gate required when it is usable only from one side?
Examples include exit-only doors with no operating hardware on the exterior side or separate enter and exit fare gates in transit stations....
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
§ 38.159(b)(1) Design load
Nonworking parts, such as platform, frame and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
413.1.1 Caption Controls (Section-by-Section Analysis)
413.1.1 Caption Controls (Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides physical volume adjustment controls, such ICT must...
-
4.2.6. Staff Training Frequency
Percent ($ millions) Cost Category Staff Training 4x Per Year Primary Analysis Percent Change Captioning Hardware...
-
1010.1.9.8.1 Delayed egress locking system
An attempt to egress shall initiate an irreversible process that shall allow such egress in not more than 15 seconds when a physical effort to exit is applied to the egress side door hardware...
