Examples include exit-only doors with no operating hardware on the exterior side or separate enter and exit fare gates in transit stations....
Search Results "Compartment Hardware"
Commonly Searched Documents
-
Is compliance on both sides of a door or gate required when it is usable only from one side?
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
§ 38.159(b)(1) Design load
Nonworking parts, such as platform, frame and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
- Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
Urinals
Such toilet rooms will still be required to provide an accessible toilet compartment. Commenters urged that the exception be eliminated....
-
§ 38.159(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph (b)(2) prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment...
-
413.1.1 Caption Controls (Section-by-Section Analysis)
413.1.1 Caption Controls (Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides physical volume adjustment controls, such ICT must...
-
4.2.6. Staff Training Frequency
Percent ($ millions) Cost Category Staff Training 4x Per Year Primary Analysis Percent Change Captioning Hardware...
-
1010.1.9.8.1 Delayed egress locking system
An attempt to egress shall initiate an irreversible process that shall allow such egress in not more than 15 seconds when a physical effort to exit is applied to the egress side door hardware...
- Salsbury Industries See Through Metal Locker Triple Tier 1 Wide
- Salsbury Industries See Through Metal Locker Double Tier 1 Wide
- Salsbury Industries See Through Metal Locker Double Tier 3 Wide
- Salsbury Industries See Through Metal Locker Triple Tier 3 Wide
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
Alternate Roll-in Showers
The revised language clarifies the location of the entry at the end of the long side of the compartment (608.2.3)....
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
3. Lavatory knee clearance
Lavatory knee clearance: To allow persons who use wheelchairs to pull under the lavatory and to use the faucet hardware, the following features need to be provided -- a 29-inch-high clearance...
-
Wheelchairs
storage in the cabin of wheelchairs or components of wheelchairs, including folding, collapsible, or breakdown battery-powered wheelchairs [Sec. 382.41(e)] as follows: • In overhead compartments...
-
F203 General Exceptions
For example, UFAS Section 4.17 contains provisions for wheelchair accessible toilet compartments, but does not contain provisions for ambulatory accessible toilet compartments....
-
E. Services in the Cabin
because, it is apparent, her disability limits her ability to reach up to the overhead compartment....
- Tork Elevation® Matic® Hand Towel Roll Dispenser with Intuition® Sensor, Black
- Salsbury Industries See Through Metal Locker Single Tier 3 Wide
- Salsbury Industries See Through Metal Locker Single Tier 1 Wide