is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2 inch (13 mm) horizontally...
Search Results "Horizontal Standing Support"
-
§ 38.159(b)(7) Platform gaps
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Transfer Surface Size: Equipment Used by Patients in Supine, Prone, or Side-Lying Position (M301.2.2)
As noted earlier, the technical criteria do not address the overall width and depth of patient support surfaces because of the diverse shape and size of these surfaces....
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
The transfer surface dimensions do not include headrests, footrests, or similar supports for body extremities that do not support the patient’s overall body position....
-
AJW Architectural Products U716 Series 16"W x 20"H Channel Frame Mirror w/ Mounted Shelf - Plate Glass Surface
. #18 ga support bracket is welded to both frame and shelf, ground smooth. Back: Fabricated of #20 ga pre-plated galvanized steel, with embossed horizontal louver mounting brackets....
-
AJW Architectural Products U705 Series 16"W x 30"H Angle Frame Mirror w/ Mounted Shelf - Plate Glass Surface
. #18 ga support bracket is welded to both frame and shelf then ground smooth....
-
Sportsbook Conversations: What Our Community Really Looks For
I’ll share what keeps coming up in our discussions—and I’d love you to reflect on where you stand. What Makes a Sportsbook Feel Trustworthy to You?...
-
Guest Bathrooms
They must be able to support 250 PSI. However, 350 PSI is highly recommended. 609 Grab Bars. 609.8 Structural Strength....
-
Endorphin 355 Series e4 Resistance System
The 355 series is an adjustable, wheelchair accessible stand that fits the Endorphin cycles....
-
§ 1194.23(k)(3)
(3) If key repeat is supported, the delay before repeat shall be adjustable to at least 2 seconds. Key repeat rate shall be adjustable to 2 seconds per character....
-
§ 1194.31(e)
(e) At least one mode of operation and information retrieval that does not require user speech shall be provided, or support for assistive technology used by people with disabilities shall...
-
§ 1194.23(b)
(b) Telecommunications products which include voice communication functionality shall support all commonly used cross-manufacturer non-proprietary standard TTY signal protocols....
-
E208.1 General (Section-by-Section Analysis)
E208.1 General (Section-by-Section Analysis) This section proposes to require agencies, when providing support services or documentation for ICT, to do so in conformance to the provisions...
-
§100.500(d) Relationship to discriminatory intent
A demonstration that a practice is supported by a legally sufficient justification, as defined in paragraph (b) of this section, may not be used as a defense against a claim of intentional...
-
Sloped Surfaces
The amount of slope or grade is described as the proportion of a vertical rise to a horizontal length....
-
Running Slope [1017.7.1]
Running slope is often described as a ratio of vertical distance to horizontal distance, or rise to run (figure 9)....
-
1009.3 Stairways
The clear width of 48 inches (1219 mm) between handrails is not required for stairways accessed from a refuge area in conjunction with a horizontal exit....
-
810.5.3 Platform and Vehicle Floor Coordination
light rail, commuter rail, and intercity rail systems subject to Department of Transportation regulation 49 CFR 37.21 where it is not operationally or structurally feasible to meet the horizontal...
-
IV. Public Comments and Commenters
Approximately 292 commenters supported Option One without any recommendation for change....
-
1013.4 Raised character and braille exit signs
Each exit door through a horizontal exit that is required to comply with Section 1013.1, shall be identified by a sign with the words, “TO EXIT.”...
-
1015.2 Where required
equipment platforms, aisles, stairs, ramps and landings, that are located more than 30 inches (762 mm) measured vertically to the floor or grade below at any point within 36 inches (914 mm) horizontally...
-
4.6.1 General
The other telescopes shall be usable from a standing position. Telescopes or periscopes at different heights can be mounted separately or on a single pedestal. Exception....
-
A Different Kind of Casino Game
Aviator stands apart from traditional slots with its simple concept, quick rounds, and dynamic format....
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
