RV parking spaces within camping units with mobility features and RV pull-up spaces at dump stations must comply with the technical requirements for width, surface, and slope of RV spaces...
Search Results "Cross Slope"
2010 ADA Definition
Cross Slope: The slope that is perpendicular to the direction of travel (see running slope).
-
RV Parking Spaces Within Camping Units With Mobility Features and RV Pull-Up Spaces at Dump Stations [F244.2.3.2.1 and F244.4]
-
11B-1007.3.1 Start of play
A clear floor or ground space 48 inches (1219 mm) minimum by 60 inches (1524 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
A4.8.4 Landings
Level landings are essential toward maintaining an aggregate slope that complies with these guidelines....
-
11B-1007.3.1 Start of play
A clear floor or ground space 48 inches (1219 mm) minimum by 60 inches (1524 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
11B-1007.3.1 Start of play
A clear floor or ground space 48 inches (1219 mm) minimum by 60 inches (1524 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
1007.3.1 Start of Play
A clear floor or ground space 48 inches (1220 mm) minimum by 60 inches (1525 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
1010.1 Turning Space
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions. ...
-
E103.4 508 Standards (Section-by-Section Analysis)
The term “508 Standards” is defined in order to provide consistent cross-reference within the standards to all chapters that apply to Section 508-covered federal entities, namely: 508 Chapters...
-
Managed Use
For example, a trail may be managed for both equestrian and hiker/pedestrian use in the summer and for cross-country skiing in the winter....
-
Handrails [ADA Standards §504.6, §505]
Handrails can have circular or non-circular cross-sections. The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
-
1016.8 Resting Intervals
This section contains the technical requirements for the length (1016.8.1), width (1016.8.2), and slope (1016.8.3) of resting intervals; and for a turning space (1016.8.4) where resting...
-
Beach Access Routes
Beach access routes allow pedestrians to cross a beach so that they can play, swim, or participate in other beach- or water-related activities....
-
R302.2 Components
Pedestrian street crossings and at-grade rail crossings complying with R302.3 through R302.7, and R306; 3....
-
R302.7.1 Vertical Alignment
Where pedestrian access routes cross rails at grade, the pedestrian access route surface shall be level and flush with the top of rail at the outer edges of the rails, and the surface between...
-
Fire Kirin game
Beyond its engaging mechanics, the Fire Kirin game is celebrated for its accessibility and cross-platform compatibility....
-
HEWI System Lignum Multiplex Handrails
Individual wood layers are bonded in cross layering; this produces the characteristic striped look. lignum multiplex is characterized by its high degree of stability; the bonding produces...
-
1009 Swimming Pools, Wading Pools, and Spas
Specifications are provided for various means of providing pool access, including pool lifts, sloped entries, transfer walls, transfer systems, and stairs....
-
T402.8.1 Deployment to Roadways or to Curb Height Boarding and Alighting Areas
The running slope of ramps and bridgeplates used for deployment to the roadway or to curb-height boarding and alighting areas shall be 1:6 maximum, as measured to ground level with the non-rail...
-
When Ramps Are Required
A ramp run is a length of a continuous sloped surface that is ascending or descending....
-
Exceptions When Conditions Do Not Permit Full Compliance
The regulatory negotiation committee report used the example of constructing a portion of a trail in a steeply sloped area, where complying with the provision for running slope would require...
-
Recommended Objective Test Method and Performance Specifications
Performance Specifications The objective test method using the Rotational Penetrometer is recommended because it provides valid and reliable measurements of surface firmness and stability on slopes...
-
410.6.3 Interoperability (Section-by-Section Analysis)
with real-time two-way voice communication operates outside of a closed network or connects to another system, such ICT must ensure real-time text interoperability by using one of two cross-manufacturer...
-
Managed Use
For example, a trail may be managed for both equestrian and hiker/pedestrian use in the summer and for cross-country skiing in the winter....
-
K. SIDEWALKS
streets, roads, and highways under the jurisdiction of Humboldt County that have not been constructed or altered since January 26, 1992; and (2) a timetable to provide curb ramps or other sloped...
