Where building elements such as coat hooks, lockers, or operable parts are designed for use primarily by children, the suggested dimensions of Table 11B-308.4 shall be permitted....
Search Results "Facility Use"
Filters
Commonly Searched Documents
-
11B-308.4 Suggested reach ranges for children
-
6.3 PV Sytems at Newly Constructed Parking Facilities
6.3 PV Sytems [sic] at Newly Constructed Parking Facilities 6.3D – New Construction, Standard / Accessible Parking Fully Covered - Provide accessible parking in accordance with the CBC...
-
2. Accessibility Technical Standard
flight-related services automated airport kiosks currently make available, the Department believes that the standard we are now adopting is entirely adequate to ensure independent access and use...
-
§ 382.57(b)
(b) As a carrier, you must comply with the following requirements for any shared-use automated airport kiosks you jointly own, lease, or control at a U.S. airport with 10,000 or more enplanements...
-
DISCUSSION
The AASHTO Guide for the Development of Bicycle Facilities is the primary reference for designers of shared use facilities and has been adopted as standard for shared use path design by...
-
10.3.1(15)
(15) Where clocks are provided for use by the general public, the clock face shall be uncluttered so that its elements are clearly visible....
-
Forward Approach
A forward approach provides easier access than a parallel approach for people using wheelchairs....
-
11B-604.8.1.4 Toe clearance
Compartments for children’s use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor. [2010 ADAS] 604.8.1.4 Toe Clearance....
-
11B-604.8.1.4 Toe clearance
Compartments for children’s use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor. [2010 ADA Standards] 604.8.1.4 Toe Clearance....
-
§382.53(b)
(b) The information you must provide under paragraph (a) of this section includes, but is not limited to, the following: Information concerning flight safety, ticketing, flight...
-
§382.53(a)
(a)
-
4.1.1(4) Temporary Structures
These guidelines cover temporary buildings or facilities as well as permanent facilities....
-
11B-206 Accessible routes
Accessible routes shall be provided in accordance with Section 11B-206 and shall comply with Division 4. 11B-206.4.10 Medical care and long-term care facilities....
-
604.8.1.4 Toe Clearance
Compartments for children's use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor....
-
Employee Work Areas [§206.2.8]
Employee Work Areas [§206.2.8] Common use circulation paths must be accessible in employee work areas that are 1,000 sq. ft. or more in size....
-
§104.22 Existing facilities.
[45 FR 30936, May 9, 1980, as amended at 65 FR 68055, Nov. 13, 2000]
-
F203.12 Animal Containment Areas
Animal containment areas that are not for public use shall not be required to comply with these requirements or to be on an accessible route....
-
203.12 Animal Containment Areas
Animal containment areas that are not for public use shall not be required to comply with these requirements or to be on an accessible route....
-
Exceptions for Specific Occupancies [§206.2.3]
§206.2.3] The Standards also include limited exceptions for accessible routes between stories in air traffic control towers and, under certain conditions, detention and correctional facilities...
-
232.1 General
(2) Alterations to detention and correctional facilities. ...
-
604.8.1.4 Toe Clearance
Compartments for children’s use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor....
-
604.8.1.4 Toe Clearance
Compartments for children’s use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor....
-
§104.22(d) Time period
A recipient shall comply with the requirement of paragraph (a) of this section within sixty days of the effective date of this part except that where structural changes in facilities are...
-
3(1)
(1) On accessible routes in public and common use areas, and for primary entry doors to covered units, doors that comply with ANSI 4.13 would meet this requirement....