Controls for faucets shall comply with Section 11B-309.1. Hand-operated metering faucets shall remain open for 10 seconds minimum....
Search Results "Control End Wall"
-
11B-809.9.6 Controls
-
11B-809.9.6 Controls
Controls for faucets shall comply with Section 11B-309.1. Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
Minimum Rear Wall Required.
The minimum length of the wall at the back of the bench would be 42" + 30" = 72" or 6'-0"....
- Plantronics Ameriphone by Clarity® JV 35 Amplified Phone
-
Symbols of Accessibility [4.30.7]
used to identify the location of text telephones (TTYs), including on directional signs required at banks of telephones without TTYs used to identify phones equipped with volume control...
-
Attachment J
Ensure that handrails are mounted between 34 inches and 38 inches above the ramp surface, with ends rounded or returned smoothly to the floor, wall, or post, and that they do not rotate...
-
11B-604.5.1 Side wall
The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
-
11B-220.2 Point-of-sale devices
Where point-of-sale devices are provided, all devices at each location shall comply with Sections 11B-707.3, 11B-707.7.2, and 11B-707.9. Where point-of-sale devices are provided at...
-
11B-220.2 Point-of-sale devices
Where point-of-sale devices are provided, all devices at each location shall comply with Sections 11B-707.3, 11B-707.7.2, and 11B-707.9. Where point-of-sale devices are provided at...
-
Gates and Barriers
If gates or barriers are constructed to control access to outdoor recreation access routes, beach access routes, or trails, include openings wide enough to allow hiker passage (figures 47...
- Wagner Instruments Mark-10 M4 Digital Force Gauge
-
Other Features
Other Features Most pushbutton-integrated APS can provide additional features. These may include Braille labels for street names, actuation indicators (a light or beep), tactile...
-
707.3 Operable Parts
707.3 Operable Parts. Operable parts shall comply with 309. Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch,...
-
707.3 Operable Parts
Operable parts shall comply with 309. Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without...
-
Issue 9: Reach (how far?)
Issue 9: Reach (how far?) APS devices can be located in landscaped areas if the pushbutton is reachable from a level paved area. Figure 12 shows a location where new APS (and new...
-
Issue 6: Pre-timed signals (an APS is more than a pushbutton)
Issue 6: Pre-timed signals (an APS is more than a pushbutton) Since pedestrians don’t need to use the pushbutton to get a WALK signal at pre-timed signals or where pedestrian...
-
Issue 5: Tactile arrow (in line)
Issue 5: Tactile arrow (in line) Figure 9: Tactile arrow not aligned with crosswalk direction. Figure 10: Location where tactile arrow is aligned with direction of travel...
-
707.3 Operable Parts
Operable parts shall comply with 309. Unless a clear or correct key is provided, each operable part shall be able to be differentiated by sound or touch, without...
-
§27.71(k)(6) Input.
(6) Input. Input devices must comply with paragraphs (k)(6)(i) through (iv) of this section.
-
§ 27.71(k)(6) Input
(6) Input. Input devices must comply with paragraphs (k)(6)(i) through (iv) of this section.
- Plantronics Clarity XLC3.4 TTY Phone