Wagner Instruments Mark-10 M4 Digital Force Gauge

Made in America, the M4 Digital Force Gauge is similar to the full featured Mark-10 M5 Digital Force Gauge, but with selected features required for basic hand-held force measurement or limited force test stand use.

• Tension & Compression

• Capacity: 500 lbf / 250 kgf / 2500 N

• USB/RS232/ANALOG/MITUTOYO

• MESURlite Data Sortware

• 50 Data Point Memory

• Statistical Analysis

• Accuracy: ± 0.2% of Full Scale

Features

• Large graphic liquid crystal display of:

  • Primary force reading - 6 digit

  • Peak force readings - maximum tension & compression

  • Set point force - programmed high & low settings

  • Load bar - visual analog indicator of applied force

• Complete computer interface outputs - USB / RS232 / Analog / Mitutoyo.

• High speed USB & RS232 to 115, 200 baud.

• MESURlite data collection software and USB cable included.

• 50 data point storage in memory with output to PC.

• Statistical analysis - minimum, maximum, mean & standard deviation.

• Programmable set points for force test stand control.

• 3000 Hz peak sampling of rapid occurring events.

• Analog ± 1 Vdc output for instantaneous control of external devices.

Construction

• Large backlit 6 digit graphic display.

• American standard load shaft and mounting threads.

• Reversible load shaft—up or down—maintains upright keyboard.

• 150% of capacity overload protection.

Power Requirements

• Continuous operation with 110 or 220 Vac power adapter.

• Rechargeable NiMH battery for up to 30 hours continuous use.

Accuracy

• Accurate to ± 0.2% of full scale ± 1 least significant digit.

Weight & Dimensions

• 1 lb. [0.5 kg]

• 6" [152 mm] H x 2.5" [64 mm] W x 1.3" [33 mm] D