The running slope is measured parallel to the direction of pedestrian travel....
Search Results "Measuring Technique"
Commonly Searched Documents
-
Perpendicular Curb Ramps (R304.2) (Section-by-Section Analysis)
-
Characteristics of Study Participants
On the surfaces objectively measured as firm and stable, subjects with higher fitness levels had lower heart rate and RPE scores (i.e., walking was less difficult)....
-
References
"Using Environmental Simulation to Measure Accessibility for Older People. In E. Steinfeld and S. Danford (Eds.), Measuring Enabling Environments, Plenum Press: 183-206....
-
Components (M303.4)
Other anthropometric data show the heights of the midpoint of the breast to be 13 inches for the 5th percentile woman and 18 inches for the 95th percentile woman when measured from seat...
-
Section 36.207 Places of Public Accommodation Located in Private Residences (Preamble, Section-by-Section Analysis)
of this rule apply to the covered portions, including requirements to make reasonable modifications in policies, eliminate discriminatory eligibility criteria, take readily achievable measures...
-
ALIGNMENT OF 19-INCH RECOMMENDATION WITH ACCESS BOARD PROPOSED RULEMAKING
In its proposed rule, the Access Board proposed that the “height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured...
-
Moisture and Durability
24 (Top 12 mm) 76 (sampled at 25mm) F .179 31 156 G .149 18 82 H .514 33 134 Moisture content measurements...
-
Appendix 4 – References
Measurement consistency and three-dimensional electromechanical anthropometry. ...
-
EXECUTIVE SUMMARY
Electroacoustic Performance Standards: Recommendations That the speech signal meet or exceed a Speech Transmission Index (STI) of .84, measured at the earphones....
-
Accessibility
Rotational Penetrometer measured "firmness" in inches (x25.4 yields mm) Surface 1 week 1 month 2 months 3 months 4 months 5 months 6 months...
- 2101KG BT - Digital Platform Scale with Built-in Pelstar Wireless Technology
- 2101KL BT - Digital Platform Scale with Built-in Pelstar Wireless Technology
-
Site Impracticality Determinations
A few commenters stated that the individual building analysis should involve a measurement between the entrance and only one designated vehicular or pedestrian arrival point....
-
Section G: Ramps
(§405.6) G4 Is the ramp, measured between handrails, at least 36" wide?...
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
Updates and Other Pocket Guides
For ADA survey and compliance tools that will simplify your field measurement process and plan reviews, the Corada Shop has a growing collection of templates and tools that you can download...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
The symbol shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline of the symbol....
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
In consent decrees, the Department of Justice has often ignored slopes in the direction of travel when no measurement on an accessible route exceeds 5.9% on sloped walking surfaces, 8.9%...
-
707.4 Privacy
., a covered entity does not have to take measures that would result in a fundamental alteration of its program or would cause undue burdens, provide adequate protection to operators of...
-
Step 4: Calculate Cumulative Deviation Percentage
Add the measurements of permitted deviations from step 3. If these deviations occur on 15 percent or more of the total trail length, FSTAG doesn't apply to the trail....
-
Mounting Height
(This can be measured to the centerline or to the bottom edge of the appliance). The 80 inch height is based on research indicating it to be the most effective for a 75 cd lamp....
-
Accessible Round Table Style
Aisles between round tables require at least three feet of space between the tables (measured from the back of one chair to the back of the chair directly behind it)....
-
Engineered Surfaces
The roughness index is a measurement how much vertical deviation a standard wheel will experience as it travels over these surfaces and will be explained in more detail later on....
-
INTRODUCTION
These requirements are subjective; objective measures are not specified....