This means that signs can be placed well out of reach of Braille readers, even on parapet walls and on walls beyond barriers....
Search Results "Head End Wall"
Filters
Commonly Searched Documents
-
11B-810.6 Rail station signs
-
11B-407.4.1 Car dimensions
ELEVATOR CAR DIMENSIONS MINIMUM DIMENSIONS Door Location Door clear width Inside car, side to side Inside car, back wall...
-
11B-903.6 Structural strength
Benches shall be affixed to the wall or floor....
-
4.34.5.5(4) Controls
In the shower stall in Fig. 35(a), all controls, faucets, and the shower unit shall be mounted on the side wall opposite the seat....
-
Can stair handrail extensions overlap door maneuvering clearances?
However, the door maneuvering clearance can be offset up to 8” from the face of the door to accommodate wall thickness, casework, handrails, moldings, and other elements at doorways....
-
11B-903.6 Structural strength
Benches shall be affixed to the wall or floor....
-
Toe Clearance: ADA Standard Section 604.8.1.4
Section 604.8.1.4 covers the current ADA Standards for toe clearance at wheelchair accessible compartments.
-
Dispensers: ADA Standard Section 604.7
Section 604.7 covers the current ADA Standards for toilet paper dispensers.
-
11B-809.9.2 Clear width
have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface, appliance or wall...
-
1134A.6 Showers
A clear maneuvering space at least 30 inches in width by 48 inches in length (762 mm by 1219 mm) shall be located outside the shower, flush and parallel to the control wall. 4. ...
-
Plan 6B: 12-Foot Wide Accessible Guest Room
Features include a transfer shower, water closet length (rim to rear wall) 24 inches maximum, comparable vanity, wardrobe, and door connecting to adjacent guest room....
-
Best Practice Recommendations for Layout Planning
Doors should be propped open at the start and end of each session, and event staff should be on hand to open doors during sessions if needed....
-
D. Sign Height
Does each accessible parking space have a post- or wall-mounted sign with the symbol of accessibility mounted high enough so the sign is visible when a vehicle is parked in the space?...
-
4.21.5 Controls
In shower stalls 36 in by 36 in (915 mm by 915 mm), all controls, faucets, and the shower unit shall be mounted on the side wall opposite the seat....
-
4.21.5 CONTROLS
In shower stalls 36 in by 36 in (915 mm by 915 mm), all controls, faucets, and the shower unit shall be mounted on the side wall opposite the seat....
-
1009.7.3 Openness
The sides other than the separation walls shall be not less than 50 percent open, and the open area shall be distributed so as to minimize the accumulation of smoke or toxic gases....
-
1009.7.3 Openness
The sides other than the separation walls shall be not less than 50 percent open, and the open area shall be distributed so as to minimize the accumulation of smoke or toxic gases....
-
Stabila, Inc. Magnetic Tech Digital Electronic Level Type 96M-2
Electronic measuring technology / Two digital displays / Audible inclination guide / IP 65 Dust and Waterproof / Rare earth magnets for hands free use / Removable shock-absorbing end caps...
-
2. Other considerations when developing websites:
transcripts if sounds automatically play; provide a second, static copy of pages that are auto-refreshing or that require a timed-response; use titles, context, and other heading...
-
608 Shower Compartments
608.4) the location and operation of controls, faucets, and spray units (608.5) shower spray units and water temperature (608.6) a new exception for fixed shower heads...
-
709.5 Openings
The doors shall have head and jamb stops, astragals or rabbets at meeting edges and automatic-closing devices. Positive-latching devices are not required....
-
Hager Companies Round Push/Pull Bar Set 157D-V-B
Round Push/Pull Bar Set 157D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 164D-V-B
Round Push/Pull Bar Set 164D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 161D-V-B
Round Push/Pull Bar Set 161D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
