Are all built-in dispensers, receptacles, or equipment mounted so the front does not extend more than 4 inches from the wall if the bottom edge is between 27 inches and 80 inches above the...
Search Results "Head End Wall"
Filters
Commonly Searched Documents
-
H14
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
In a wheelchair accessible compartment with a door located in the side wall or partition, either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 60 inches (1524 mm) deep...
-
Willoughby Industries US-HC Cabinet Shower
Standard equipment shall include: Shower valve (NPS) non-adjustable penal shower head (FX) Hand held Flex shower head (w/ quick disconnect, vacuum breaker, and (1) hook) (ICD)...
-
Spectrum Aquatics Traveler II XRC500 Pool Lift
Includes: Two watertight remote controls, battery and battery charger, adjustable swing out footrest for ease of transfer, armrests with non-slip grip for safety and comfort, padded head...
-
8 [§§ 4.3.3; 4.3.7]
The measurement should extend from where the ramp run meets the level sidewalk (at the lower end of the arrow) to the opposite edge of the sidewalk (where the sidewalk meets the grass)....
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm. ...
-
II-9.2000 Complaints.
[Insert the following text at the end of this section, p. 51.] Is a private plaintiff entitled to compensatory damages? ...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm. Figure 304.3.2 T-Shaped Turning Space...
-
11. Appendix D to Part 37 is amended by
Under Section 37.93 remove the period at the end of last sentence in the third paragraph and replace with it comma, and add the following language: “except where doing is necessary to comply...
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
Temporary Disabilities
In granting eligibility to such a person, the entity should establish an expiration date for eligibility consistent with the expected end of the period disability....
-
§ 37.213(a)(1)
The operator shall transmit a copy of the form to the passenger no later than the end of the next business day following the receipt of the request....
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
4.3.5.4 360-degree Turn
Obviously, better space planning can also be used to avoid dead end spaces entirely but that cannot be mandated in a standard....
-
Willoughby Industries WAF-3300 AquaFount® Three Station Solid Surface Washfountain
The preassembled water distribution heads and pedestal base shall be constructed of heavy gauge, type 304 stainless steel....
-
Willoughby Industries WAF-3606 AquaFount® Six Station Full Round 36" Solid Surface Deep Bowl Washfountain
The preassembled water distribution heads and pedestal base shall be constructed of heavy gauge, type 304 stainless steel....
-
Willoughby Industries WAF-3603 AquaFount® Three Station Half Round 36" Solid Surface Deep Bowl Washfountain
The preassembled water distribution heads and pedestal base shall be constructed of heavy gauge, type 304 stainless steel....
-
804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1525...
-
Question 10
Is the accessible entrance into the building free of obstacles that block the clear wall and floor space needed for opening the door (between 18 and 42 inches on the latch side of the door...
-
605.2 Height and Depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (430 mm) maximum above the finish floor or ground....
-
§ 36.304(d)(3)(ii)
(ii) Where an existing swimming pool has at least 300 linear feet of swimming pool wall, it shall comply with the applicable requirements for swimming pools, except that it shall be required...
-
711.3.1.2 Through-penetration firestop system
accordance with ASTM E 814, with a minimum positive pressure differential of 0.01 inch (2.49 Pa) of water and shall have an F rating of not less than the required fire-resistance rating of the wall...
-
M. Reach Range
Are the rod and shelf in the clothes closet or wall mounted unit within 54" of the floor for side approach or 48" of the floor for forward approach so persons who use wheelchairs can approach...
