However, the door maneuvering clearance can be offset up to 8” from the face of the door to accommodate wall thickness, casework, handrails, moldings, and other elements at doorways....
Search Results "Head End Wall"
-
Can stair handrail extensions overlap door maneuvering clearances?
-
11B-903.6 Structural strength
Benches shall be affixed to the wall or floor....
-
810.6 Rail Station Signs
This means that signs can be placed well out of reach of braille readers, even on parapet walls and on walls beyond barriers....
-
11B-810.6 Rail station signs
This means that signs can be placed well out of reach of Braille readers, even on parapet walls and on walls beyond barriers....
-
608.3 Grab Bars
shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use provided that reinforcement has been installed in walls...
-
604.3.2 Overlap
EXCEPTION: In residential dwelling units, a lavatory complying with 606 shall be permitted on the rear wall 18 inches (455 mm) minimum from the water closet centerline where the clearance...
-
11B-505.10.3 Bottom extension at stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
11B-810.6 Rail station signs
This means that signs can be placed well out of reach of Braille readers, even on parapet walls and on walls beyond barriers....
-
11B-810.6 Rail station signs
This means that signs can be placed well out of reach of Braille readers, even on parapet walls and on walls beyond barriers....
-
2. Other considerations when developing websites:
transcripts if sounds automatically play; provide a second, static copy of pages that are auto-refreshing or that require a timed-response; use titles, context, and other heading...
-
608 Shower Compartments
608.4) the location and operation of controls, faucets, and spray units (608.5) shower spray units and water temperature (608.6) a new exception for fixed shower heads...
-
709.5 Openings
The doors shall have head and jamb stops, astragals or rabbets at meeting edges and automatic-closing devices. Positive-latching devices are not required....
-
4.3.5.1 90-Degree Turn
These data are based on measurements of wheeled mobility users performing 90-degree turns in a hallway, built with mock walls. The outside wall of the hallway was fixed....
-
D. Sign Height
Does each accessible parking space have a post- or wall-mounted sign with the symbol of accessibility mounted high enough so the sign is visible when a vehicle is parked in the space?...
-
4.21.5 Controls
In shower stalls 36 in by 36 in (915 mm by 915 mm), all controls, faucets, and the shower unit shall be mounted on the side wall opposite the seat....
-
4.21.5 CONTROLS
In shower stalls 36 in by 36 in (915 mm by 915 mm), all controls, faucets, and the shower unit shall be mounted on the side wall opposite the seat....
-
1009.7.3 Openness
The sides other than the separation walls shall be not less than 50 percent open, and the open area shall be distributed so as to minimize the accumulation of smoke or toxic gases....
-
1009.7.3 Openness
The sides other than the separation walls shall be not less than 50 percent open, and the open area shall be distributed so as to minimize the accumulation of smoke or toxic gases....
-
II-7.3300 Seven-digit lines.
[Insert the following text at the end of this section, p. 42.]...
-
410.6 Doors and Gates
End doors and gates shall provide a clear width 32 inches (815 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm. ...
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm....