Ramp landing length specified by Section 11B-405.7.3 shall be permitted to be 48 inches (1219 mm) long minimum....
Search Results "Counter Length"
Filters
Commonly Searched Documents
-
11B-1007.2 Accessible routes
-
11B-407.2.3.1 Floor designation
The outside diameter of the star shall be 2 inches (51 mm) and all points shall be of equal length. Raised characters, including the star, shall be white on a black background....
-
Plan 5A: 13-Foot Wide Accessible Guest Room
The following accessible features are provided in the bathroom: • Comparable vanity counter top space (section 806); • Transfer shower (section 603.2); • Shower seat (section 610.3...
-
606.2 Clear Floor Space
knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter...
-
606.2 Clear Floor Space
knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter...
-
206.2.8 Employee Work Areas
Common use circulation paths located within employee work areas that are less than 1000 square feet (93 m²) and defined by permanently installed partitions, counters, casework, or furnishings...
-
FEEDING + COMMODITY DISTRIBUTION
Examples of standard items include: food, water, cots, blankets, clothing, Diabetes testing strips, mobility aids, and over-the-counter medicine....
-
606.2 Clear Floor Space
knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter...
-
206.2.8 Employee Work Areas
Common use circulation paths located within employee work areas that are less than 1000 square feet (93 m2) and defined by permanently installed partitions, counters, casework, or furnishings...
-
Phase II – Textures
Three general patterns of fish coloration were verbally introduced to the participants (spots, stripes and counter shading)....
-
Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 24
24" length (610mm) bar. For use in hospital and hotel bathrooms. 1" (25mm) diameter bar is 18-gauge (1.2mm), type 304 stainless steel, satin finish. Mounting with snap flange....
-
Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 18
18" length (455mm) bar. For use in hospital and hotel bathrooms. 1" (25mm) diameter bar is 18-gauge (1.2mm), type 304 stainless steel, satin finish. Mounting with snap flange....
-
Number of accessible cells
This commenter stressed that the regulations need to address the differences between a local detention facility with low average lengths of stay as opposed to a State prison housing inmates...
-
221 Assembly Areas
shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile of the total row length...
-
Number of accessible cells. (Section-by-Section Analysis)
This commenter stressed that the regulations need to address the differences between a local detention facility with low average lengths of stay as opposed to a State prison housing inmates...
-
11B-502.3.3 Marking
Access aisle markings may extend beyond the minimum required length. [2010 ADA Standards] 502.3.3 Marking. Access aisles shall be marked so as to discourage parking in them....
-
Gamco Semi-Recessed Towel Dispenser - TD-4F
Door mounted on full length stainless steel piano-hinge and provided with tumbler lock. All welded construction. Capacity: 350 C-fold or 475 multi-fold towel. ...
-
American Specialties Automatic Roll Paper Towel Dispenser and Waste Receptacle 94696A
Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8" or 9" (205 or 230 mm) wide, 800' (244 m) long rolls. 10 gal. (37.8 L) stainless steel waste receptacle....
-
Bobrick ConturaSeries Surface-Mounted Sanitary Napkin Disposal B-270
Cover is drawn, one-piece construction; secured to cabinet with full-length stainless steel piano-hinge. Capacity: 1.0-gal. (3.8-L)....
-
QUESTION: WHAT DOES THE RULE MEAN BY “EXISTING FREIGHT OPERATIONS?”
Where freight trains have not used a track passing through a station for a significant length of time (e.g., as noted in the Preamble to the rule, 10 years), the Department treats the situation...
-
11B-502.4 Floor or ground surfaces
The access aisle needs to be adjacent to, and the same required length as the accessible space it serves. ...
-
11B-1007.2 Accessible routes
Ramp landing length specified by Section 11B-405.7.3 shall be permitted to be 48 inches (1219 mm) long minimum. 6. ...
-
Who Decides Which Aid or Service Is Needed?
Covered entities may require reasonable advance notice from people requesting aids or services, based on the length of time needed to acquire the aid or service, but may not impose excessive...
